2019-12-17, 03:57 PM
As you know the Raspberry Pi 4 forced us to redesign the Moitessier HAT and enclosure. Both of them are already in manufacturing and we expect to start selling them in January.
[attachment=664][attachment=665][attachment=666][attachment=667][attachment=668]
It contains the same chips and features but there are few changes:
We are working on an unique driver for Raspberry 3 and 4. When this is done you will found it here: https://www.rooco.eu/2018/06/13/firmware...ssier-hat/
The new Moitessier HAT 2 will be back in stock on 17th January 2020. Back orders are allowed.
[attachment=664][attachment=665][attachment=666][attachment=667][attachment=668]
It contains the same chips and features but there are few changes:
- We have changed the shape so it can be attached to Rapsberry Pi 3 and Raspberry Pi 4.
- There is a switch to turn OpenPlotter off. To turn OpenPlotter on again you need to un- and replug the power supply. The button is connected to the microcontroller on the HAT. If it is pressed a special command is sent to the Pi. The driver on the Pi recognizes the command and will automatically execute the shutdown command. So no need to configure anything in OpenPlotter.
- Now the PCB is blue.
We are working on an unique driver for Raspberry 3 and 4. When this is done you will found it here: https://www.rooco.eu/2018/06/13/firmware...ssier-hat/
The new Moitessier HAT 2 will be back in stock on 17th January 2020. Back orders are allowed.