OpenMarine

(2020-12-12, 10:37 AM)kinefou Wrote: [ -> ]Hello,
I want ti try it on my raspberry pi4, but i don't find 'user' and 'pwd'  
Thanck you for your help

---

sorry for the question I found the answer to on the lysmarine site !!
Cdlt

(2021-02-28, 08:35 AM)Luckbert Wrote: [ -> ]Hello mgrouch,
I tried downloading the OS from the site cloudsmith.
This fails for me. What is my problem?
Greet Jürgen

(2021-03-01, 05:38 PM)mgrouch Wrote: [ -> ]

(2021-02-28, 08:35 AM)Luckbert Wrote: [ -> ]Hello mgrouch,
I tried downloading the OS from the site cloudsmith.
This fails for me. What is my problem?
Greet Jürgen

It’s out of free monthly allowance for download traffic from
cloudsmith. It’s going to be reset to new month allowance
in few hours and users will be able to download again. 

Thanks

(2021-03-02, 09:33 AM)verkerkbr Wrote: [ -> ]

(2021-03-01, 05:38 PM)mgrouch Wrote: [ -> ]

(2021-02-28, 08:35 AM)Luckbert Wrote: [ -> ]Hello mgrouch,
I tried downloading the OS from the site cloudsmith.
This fails for me. What is my problem?
Greet Jürgen

It’s out of free monthly allowance for download traffic from
cloudsmith. It’s going to be reset to new month allowance
in few hours and users will be able to download again. 

Thanks

Hi MG

Just did the first tests with the 10 image. Works very well. Missing is a PowerOff button. Can be done in terminal, but you have forgotten the add one.

And the Usb sticks with the charts is recognized, but not allowed to open it.

GPS, SignalK, and MxTommy/Kip were working right out of the "box".

Regards,

Bram

And add Pi-clone and Synaptic.

(2021-03-02, 11:23 AM)mgrouch Wrote: [ -> ]

(2021-03-02, 09:33 AM)verkerkbr Wrote: [ -> ]

(2021-03-01, 05:38 PM)mgrouch Wrote: [ -> ]

(2021-02-28, 08:35 AM)Luckbert Wrote: [ -> ]Hello mgrouch,
I tried downloading the OS from the site cloudsmith.
This fails for me. What is my problem?
Greet Jürgen

It’s out of free monthly allowance for download traffic from
cloudsmith. It’s going to be reset to new month allowance
in few hours and users will be able to download again. 

Thanks

Hi MG

Just did the first tests with the 10 image. Works very well. Missing is a PowerOff button. Can be done in terminal, but you have forgotten the add one.

And the Usb sticks with the charts is recognized, but not allowed to open it.

GPS, SignalK, and MxTommy/Kip were working right out of the "box".

Regards,

Bram

And add Pi-clone and Synaptic.

PowerOff button is there. rpi-clone is there too.
See https://bareboat-necessities.github.io/m...at-os.html
(SSD boot section and Shutting Down)

found Shutdown under commands. Not the main menu or on the top menu bar as usual.

I have installed piclone from the repositories. Can be started in the terminal. Then it looks the same
as in the RaspiOS.

I only have a first impression of your "composition" of the RaspiOS 64 bits.

But it certainly have nice features.

Regards,

Bram