2021-02-06, 07:11 PM
Hi all, NMEA data from all my instruments is fed into a Quark A026 which adds in GPS and AIS data and sends it out via WiFi. Then I have a TCP connection to the Quark set up in OpenCPN (running on a Pi3+). This works fine and I can set up Dashboard displays to show Wind/Depth/Log data. Now I need to get wind data into PyPilot (also running on the Pi3+) so I can use it in Wind mode. I have an output connection in OpenCPN which sends the course to steer data to PyPilot with ECRMB, ECRMC, ECAPB in the Output Filter (not sure if I need all three of these for Pypilot to work)
My question is, should I add Wind Sentences (WIMWV) to this output filter or should I move the NMEA input connection to SignalK and then the data should be available to both OpenCPN and PyPilot?
Any advice much appreciated!
My question is, should I add Wind Sentences (WIMWV) to this output filter or should I move the NMEA input connection to SignalK and then the data should be available to both OpenCPN and PyPilot?
Any advice much appreciated!