2021-12-04, 03:31 PM
On the subject of decent quality / reasonably priced sensors I’ve had good experiences with Autonnic
https://www.autonnic.com/shop?Collection=Sensors
Steve
https://www.autonnic.com/shop?Collection=Sensors
Steve
(2023-03-22, 11:25 AM)Sailoog Wrote: [ -> ]Done!
After many changes and redesigns, we have the MacArthur HAT in beta and now we need testers. This new design is really different than the design we did in this post, but this time it is affordable and easy to manufacture.
Read the feature list and apply to be a tester here: New MacArthur HAT - Testers Wanted
(2023-03-26, 09:44 AM)Papyrus Wrote: [ -> ](2023-03-22, 11:25 AM)Sailoog Wrote: [ -> ]Done!
After many changes and redesigns, we have the MacArthur HAT in beta and now we need testers. This new design is really different than the design we did in this post, but this time it is affordable and easy to manufacture.
Read the feature list and apply to be a tester here: New MacArthur HAT - Testers Wanted
Hello, make it happen to be a tester?
(2023-05-25, 07:06 PM)leluck Wrote: [ -> ]I've read through the thread and did not see any prior questions about using the BerryGPS-IMU with the MacArthur HAT. I noted that various sensor inputs can be made through the I2C input. I have tinkered with the BerryGPS-IMU V3 and a Raspberry Pi 3B using the GPIO pins for power and data. I saw that the MacArthur HAT is stackable with some other HATs. Can the BerryGPS-IMU V3 or V4 be stacked on the MacArthur HAT for power and direct input of its data? I am very much looking forward to purchasing a MacArthur HAT and building a navigations computer for my sailboat. Many thanks.