2021-04-08, 07:32 PM
Hi, I have a tinypilot (April 2020 vintage). What's the recommended software upgrade path. Do I treat it just the same as a pypilot installation on a Pi? Thanks.
2021-04-08, 07:32 PM
2021-04-08, 08:50 PM
In summary: on tinypilot, pull the code from github and run pypilot.build.
https://github.com/pypilotWorkbook/workb...-tinypilot
If internet connectivity of the tinypilot is a problem, do it remotely from a raspberry that is connected to the internet:
https://forum.openmarine.net/showthread....4#pid10734
But unless you have a good reason to stick to the old image, I'd suggest first downloading the latest tinypilot image from https://pypilot.org/
https://github.com/pypilotWorkbook/workb...-tinypilot
If internet connectivity of the tinypilot is a problem, do it remotely from a raspberry that is connected to the internet:
https://forum.openmarine.net/showthread....4#pid10734
But unless you have a good reason to stick to the old image, I'd suggest first downloading the latest tinypilot image from https://pypilot.org/
2021-04-09, 12:58 AM
Please start just by downloading the latest tinypilot image, and reflashing the sdcard.
Once this is complete you will need to re-calibrate the inertial sensors:
https://pypilot.org/wiki/doku.php?id=calibration
Once this is complete you will need to re-calibrate the inertial sensors:
https://pypilot.org/wiki/doku.php?id=calibration
2021-04-09, 08:21 PM
Thanks both. Reimage looks like the way to go. I've only recently discovered the pypilotWorkbook - excellent stuff, and there's lots buried in ths forum that I'm slowly discovering.