2021-07-30, 01:09 PM
Hi All,
I know this has been an issue before, but cannot find the thread anymore..![Huh Huh](https://forum.openmarine.net/images/smilies/huh.png)
I have an OpenPlotter config, everything updated last week. Pi4, Adafruit ultimate compass and serial InvenSense MPU-9250. AIS data comes over USB.
The one 'problem' I have when processing this data is that there does not seem to come any NMEA data over the 300 port (SignalK connection). I do get magnetic and tilt data but no GPS.
When I add the 'old' TCP 10110 port I suddenly do get data, and everything seems to work fine. At startup I now get a warning that I should not have port 10110 enabled- so I guess I am making a mistake in SignalK config- but where?
Thanks for your help!
I know this has been an issue before, but cannot find the thread anymore..
![Huh Huh](https://forum.openmarine.net/images/smilies/huh.png)
I have an OpenPlotter config, everything updated last week. Pi4, Adafruit ultimate compass and serial InvenSense MPU-9250. AIS data comes over USB.
The one 'problem' I have when processing this data is that there does not seem to come any NMEA data over the 300 port (SignalK connection). I do get magnetic and tilt data but no GPS.
When I add the 'old' TCP 10110 port I suddenly do get data, and everything seems to work fine. At startup I now get a warning that I should not have port 10110 enabled- so I guess I am making a mistake in SignalK config- but where?
Thanks for your help!