2021-08-18, 01:39 PM
Hi all,
I have connected a YDTA-01N tankadapter on my tanksensor.
The divice seems to work OK, on the SD card it's writing the correct tank content (80% ~ 88 liter)
I connected the sensor to the N2K network.
The Shipmodule miniplex 3E N2K is getting the input from the tankmodule and from the logfile I can see for example:
$MXPGN,01F211,68BB,FF0000044C4EA800*60
The miniplex send this to UPD 10120
in the SK log I find:
Aug 17 11:54:21 2021-08-17T09:54:21.871Z canboatjs:fromPgn parsed pgn {"prio":0,"pgn":127505,"dst":255,"src":391,"input":["$MXPGN,01F211,68BB,FF0000044C4EA800*60"],"fields":{"Level":0,"Capacity":282370355.6,"Reserved1":"0"},"description":"Fluid Level","timestamp":"2021-08-17T09:54:21.871Z"}
So it look like the data is recieved in SK, however not the values like 80% and/or 88Liter
Now I have some questions:
1) How is propriatarie MXPGN recognized as N2000?
2) How is the data being read from the MXPGN sentence?
Thanks in advance
I have connected a YDTA-01N tankadapter on my tanksensor.
The divice seems to work OK, on the SD card it's writing the correct tank content (80% ~ 88 liter)
I connected the sensor to the N2K network.
The Shipmodule miniplex 3E N2K is getting the input from the tankmodule and from the logfile I can see for example:
$MXPGN,01F211,68BB,FF0000044C4EA800*60
The miniplex send this to UPD 10120
in the SK log I find:
Aug 17 11:54:21 2021-08-17T09:54:21.871Z canboatjs:fromPgn parsed pgn {"prio":0,"pgn":127505,"dst":255,"src":391,"input":["$MXPGN,01F211,68BB,FF0000044C4EA800*60"],"fields":{"Level":0,"Capacity":282370355.6,"Reserved1":"0"},"description":"Fluid Level","timestamp":"2021-08-17T09:54:21.871Z"}
So it look like the data is recieved in SK, however not the values like 80% and/or 88Liter
Now I have some questions:
1) How is propriatarie MXPGN recognized as N2000?
2) How is the data being read from the MXPGN sentence?
Thanks in advance