I am having an issue when getting my NMEA data through SignalK. OpenCPN will lock up after about 5 seconds. If I delete the signalK connection in OpenCPN and configure it to go directly to my NMEA source there are no issues.
Current SETUP:
NMEA Source - Miniplex on ethernet - UDP feed on 10110
Data source is NMEA 2000 feed and also AIS
RPI 4 - 4MB
Any recommendations?
Hello,
After updating opencpn to 5.6.2 and signalk to the latest version, I have problems with the connection in opencpn with signalk through port 3000, since it leaves stucked opencpn, the only solution I have found is to disable the serial connection (nmea0183 with a usb gps) so that the sentences do not reach opencpn.
I have a pican-m hat and I need the signalk connection (3000) to get the nmea2000 sentences (AIS&shipmodul hub), the work around has been to create the serial connection directly gps -> opencpn and keep the signalk connection without GPS data.
David Register has worked on the bug and has published this update, however I can't get it to work on OPV2 32 bits or OPV3 64 bits.
https://launchpad.net/~bdbcat/+archive/ubuntu/opencpn
Can someone help me test this beta? 5.7.1 What should this .deb be?
https://launchpad.net/~bdbcat/+archive/u..._armhf.deb
Thank you
Sergi