OpenMarine

Hi I have set up openplotter 0.8 on a pi 3. It is working with a serial to usb adaptor which is connected to a NASA AIS. This works fine, but when I try to connect another serial to usb which is connected to a system NMEA output the usb manager does not offer the second usb. If I delete the first usb input then when adding the first one both are offered. I can add either but when I try and add the second one it is not offered for selection in the add window.
I assume I should be able to have 2 usb inputs? and if so what am I doing wrong?
Thanks

When setting up the usb ports you should try to select remember port not remember by device.
Have a look at the documentation (it is not for 0.8 ) but it could help.
https://sailoog.gitbooks.io/openplotter-...nager.html

(2017-05-06, 11:48 PM)e-sailing Wrote: [ -> ]When setting up the usb ports you should try to select remember port not remember by device.
Have a look at the documentation (it is not for 0.8 ) but it could help.
https://sailoog.gitbooks.io/openplotter-...nager.html

Hi,
Thanks for the tip -  i'll give it a try.
Cheers

(2017-05-06, 11:48 PM)e-sailing Wrote: [ -> ]When setting up the usb ports you should try to select remember port not remember by device.
Have a look at the documentation (it is not for 0.8 ) but it could help.
https://sailoog.gitbooks.io/openplotter-...nager.html

Hi, Thanks that was the problem - basic error - but thanks for your reply.