OpenMarine

Full Version: [EN - SOURCE] Documentation status
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Red status: Contents of this chapter still need software development. Do not write it yet.
Blue status: Software development of this chapter is finished. You can write/update it and take screenshots.
Green status: Documentation of this chapter is finished and ready for translation.

Guidelines to collaboratehttps://docs.sailoog.com/openplotter-v1-...ollaborate

If you want to translate the documentation to your language send us an email to coordinate: http://www.sailoog.com/contact

Chapters: under construction
Compass page should be updated with this wisdom from Sean:

The calibration is automatic and continuous unless you "lock" it.

The calibration window, is only a client and just a visual display. There can be any number of these. You can connect to the pypilot server to see the calibration on a remote host by typing "pypilot_calibration host" on the command line.

The calibration only determines the 3 compass bias, the overall magnetic field strength and the inclination. These values need to be continuously updated to ensure correct operation.

It doesn't find the alignment to level (2 angles) or the alignment to the compass (1 angle) which need to be manually set whenever the sensors are remounted in the boat.
Thanks. Working on the new docs now: https://docs.sailoog.com/openplotter-v1-x-x
(2018-05-16, 05:39 PM)Sailoog Wrote: [ -> ]Thanks. Working on the new docs now: https://docs.sailoog.com/openplotter-v1-x-x

Hey,
Will you tell me how I can deal with the French traduction? (mañana ;-) )
(2018-06-06, 02:08 PM)JeanRCA Wrote: [ -> ]
(2018-05-16, 05:39 PM)Sailoog Wrote: [ -> ]Thanks. Working on the new docs now: https://docs.sailoog.com/openplotter-v1-x-x

Hey,
Will you tell me how I can deal with the French traduction? (mañana ;-) )

Avui (today in Catalan ;-) )
I will send you an invitation by private.
Now you will be autonomous and I will not be a bottle neck, thanks!
(2018-06-06, 05:23 PM)Sailoog Wrote: [ -> ]
(2018-06-06, 02:08 PM)JeanRCA Wrote: [ -> ]
(2018-05-16, 05:39 PM)Sailoog Wrote: [ -> ]Thanks. Working on the new docs now: https://docs.sailoog.com/openplotter-v1-x-x

Hey,
Will you tell me how I can deal with the French traduction? (mañana ;-) )

Avui (today in Catalan ;-) )  
I will send you an invitation by private.
Now you will be autonomous and I will not be a bottle neck, thanks!

Avui is much more efficient than mañana ;-)
I'm on my way
Perhaps I just do not get how the web pages work, but many of them seem blank. Where can I download a complete copy of the 1.2.x documentation so that I can print it off? I am particularly interested in the Network section, but I'm really looking for a full set of documentation.
(2019-03-11, 10:47 PM)MilesAhead Wrote: [ -> ]Perhaps I just do not get how the web pages work, but many of them seem blank. Where can I download a complete copy of the 1.2.x documentation so that I can print it off? I am particularly interested in the Network section, but I'm really looking for a full set of documentation.

http://forum.openmarine.net/showthread.php?tid=1690
[OP2] How to collaborate ? @Sailoog : is it still too early ?
(2020-01-16, 08:06 AM)SkipperEarly Wrote: [ -> ][OP2] How to collaborate ? @Sailoog : is it still too early ?

Not at all, it is time to docs.

Are you interested on any chapter?

This is the new docs site and guidelines to help: https://openplotter.readthedocs.io/en/la...umentation