OpenMarine

Hi all

still working on my pypilot
I have an rpi 4 with pypilot hat,  OP3.

all is quite ok even if I did not do all the calibrations and config to use it in real navigation.

just realized the CGWT recently and wonder the meanings.

if you can tell me or lead to some posts/documentation I would be very thankfull

regards

Good morning,
You also need a motor controller with an arduino which must communicate with the pi.
You can find three models in the store depending on the maximum motor power (7A, 15A and 30A)

(2024-02-16, 04:09 PM)Jean-Marc Douroux Wrote: [ -> ]Good morning,
You also need a motor controller with an arduino which must communicate with the pi.
You can find three models in the store depending on the maximum motor power (7A, 15A and 30A)

Hello,

yes I now, 
I do have a motor controller, it is just not connected at the moment off the photo

Those letters show available modes. Compass, GPS, Wind, True Wind.

that make sense
and if "C" is blinking ?

Hello everyone,
What does "Pdc" mean at the bottom left of the LCD?

it is displaying the current profile