OpenMarine

Hello,

I made a plugin for reading data from a Chinese diesel heater which allow Bluetooth connection.
This is the very first version, only for readings.
I intend to transform it in a webapp for full controll but until this will happen, any advice will be very appreciated.
The source code is here: https://github.com/Haimana/signalk-ble-heater.git

If someone want to test it, just do the following steps, until I'll publish it to npm. It was tested on RPi 4 and Debian Buster with SignalK v2.6.2

Code:
git clone https://github.com/Haimana/signalk-ble-heater.git

cd signalk-ble-heater

# Create a link (may require the use of sudo)

npm link

# Change to the Signal K server configuration directory

cd ~/.signalk

# Link your plugin using the name in the package.json file 

#(may require the use of sudo)

npm link signalk-ble-heater

For making this, I used info and/or parts of code from:
https://github.com/htool/jbd-overkill-bms-plugin.git
and
https://github.com/spin877/Bruciatore_BLE.git
https://github.com/iotmaestro/vevor-heater-ble.git
https://github.com/bderleta/vevor-ble-bridge.git
Many thanks for developers

Thank you,
Seb

PS: My controller looks like this:
[Image: 5c809233-1d11-46c6-ab4b-ca0d6d7fef5a.jpg.webp]

[Image: 5c809233-1d11-46c6-ab4b-ca0d6d7fef5a.jpg.webp]

Cool! I'm just starting my OpenPlotter project and wanted to get basic remote start through the RPi , but this is much better. Subscribed!

I'm glad if help...
I hope I'll be able to make the webapp, too, for proper monitoring and control.

sebba

manitu

sebba