OpenMarine

Full Version: IC2 Pin Assignment for MacAuther Hat
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Can someone please post the pin assignments for the QWIIC IC2 port on the MacAuther Hat.   There are 4 pins on the QWIIC connector and trying to figure out what pin goes to what pin on the IC2 devices.......... Im pacifically trying to install a couple INA219 Current Sensors and a couple Optocouplers.    The INA219 pins are  Vcc, Gnd, Sci, Sda, Vin-, Vin+
(2024-11-06, 06:06 PM)fun4all Wrote: [ -> ]Can someone please post the pin assignments for the QWIIC IC2 port on the MacAuther Hat.   There are 4 pins on the QWIIC connector and trying to figure out what pin goes to what pin on the IC2 devices.......... Im pacifically trying to install a couple INA219 Current Sensors and a couple Optocouplers.    The INA219 pins are  Vcc, Gnd, Sci, Sda, Vin-, Vin+

[attachment=3139]
(2024-11-06, 08:25 PM)Lazzz Wrote: [ -> ]
(2024-11-06, 06:06 PM)fun4all Wrote: [ -> ]Can someone please post the pin assignments for the QWIIC IC2 port on the MacAuther Hat.   There are 4 pins on the QWIIC connector and trying to figure out what pin goes to what pin on the IC2 devices.......... Im pacifically trying to install a couple INA219 Current Sensors and a couple Optocouplers.    The INA219 pins are  Vcc, Gnd, Sci, Sda, Vin-, Vin+

thank you so much!!!