2025-07-05, 09:07 PM
Hi, I have a problem with the calibration of the compass.
As shown in the picture the window does not show any data when turning the Imu.
Accelerometer cal and boat leveling when’s ok.
Imu is a icm-20948 from adafruit
Software is up to date. All openplotter and pypilot updates v4.0.11
Raspi 5
I have a second raspi with the same installation and the sensor and calibration works well there.
I have uninstalled and reinstalled pypilot in case there was something corrupt but the problem persists.
Any suggestions would be useful. I’m really stuck
Thanks!
As shown in the picture the window does not show any data when turning the Imu.
Accelerometer cal and boat leveling when’s ok.
Imu is a icm-20948 from adafruit
Software is up to date. All openplotter and pypilot updates v4.0.11
Raspi 5
I have a second raspi with the same installation and the sensor and calibration works well there.
I have uninstalled and reinstalled pypilot in case there was something corrupt but the problem persists.
Any suggestions would be useful. I’m really stuck
Thanks!