OpenMarine

Full Version: "Uredd II" installation
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
"Uredd" is the boats name, it is Norwegian and translates to "Brave"

[Image: 5753ed28d4a82ce69204fec2c6dea840.jpg]

Here are some photos of the work in progress.

Todo-list
-Install the main computer
-N2k network (Actisense+H5000 display)
-I2C sensors
-Enclosure and secure fastening of PI
Etc

[Image: 4e30df92d167fc212700d06f65c8cf06.jpg]

[Image: 6b848adbd0b3f85774d899cbbb3e47b8.jpg]

[Image: af9fb940566b4b1993a91ced663a92fe.jpg]
wow! carbon fibre is beautiful. Thanks for sharing!
Thanks!
(2016-05-16, 12:43 PM)Sailoog Wrote: [ -> ]wow! carbon fibre is beautiful. 

I second that! Where did you buy it?
Ebay is your friend Smile

Search for carbon fibre plate.
I have used a seller called "happychoice2009" for some years and they ship fast via DHL and the plates have always had perfect quality..

Smile
Hmmm an old post but wondering what screen you used as a display on the carbon plate? This looks like something that works on 12v?
(2020-05-15, 09:55 PM)davidbirnie Wrote: [ -> ]Hmmm an old post but wondering what screen you used as a display on the carbon plate? This looks like something that works on 12v?

Old, yes Tongue

it is the official raspberry pi-display 7".. works on 5V, there is a 12v-usb adapter powering it and the raspberry pi Smile
(2020-05-15, 10:17 PM)alekoy Wrote: [ -> ]
(2020-05-15, 09:55 PM)davidbirnie Wrote: [ -> ]Hmmm an old post but wondering what screen you used as a display on the carbon plate? This looks like something that works on 12v?

Old, yes Tongue

it is the official raspberry pi-display 7".. works on 5V, there is a 12v-usb adapter powering it and the raspberry pi Smile

Cool thanks for the reply. A 12v USB adapter... where do you find these? I do like the carbon board solution because I will get a big hole when I remove my radar display which isn't working at all.
(2020-05-18, 10:18 AM)davidbirnie Wrote: [ -> ]
(2020-05-15, 10:17 PM)alekoy Wrote: [ -> ]
(2020-05-15, 09:55 PM)davidbirnie Wrote: [ -> ]Hmmm an old post but wondering what screen you used as a display on the carbon plate? This looks like something that works on 12v?

Old, yes Tongue

it is the official raspberry pi-display 7".. works on 5V, there is a 12v-usb adapter powering it and the raspberry pi Smile

Cool thanks for the reply. A 12v USB adapter... where do you find these? I do like the carbon board solution because I will get a big hole when I remove my radar display which isn't working at all.

I found some on ebay, but a normal 2A or more USB car-adapter will work Smile
Hi,
I use a couple of these https://www.ebay.com/itm/DC-DC-Micro-USB...Sw02Fc0Ggu
One for the rpi and one for the usb hub.
Bought mine from France but can’t find that seller now.
Cheers
Pär W
Pages: 1 2