Checking touchscreen optimization... | disabled
Checking backlight... | disabled
Checking Power off management... | disabled
Checking Shutdown management... | disabled
Checking OpenPlotter autostart... | enabled
Checking rescue mode... | disabled
Checking debugging mode... | disabled
Checking system log file size... | System log file size: 10.12 MB
Checking OpenPlotter packages source... | added
Checking SDR processes... | SDR AIS is not running
Checking Notifications... | running
 ↳The access request no longer exists.
Checking GPIO... | pigpiod running | Seatalk1 disabled | 1W enabled | pulses disabled | digital disabled | openplotter-gpio-read not running
 ↳The access request must be aproved with read/write permission in Signal K administrator.
Checking I2C sensors... | I2C enabled | openplotter-i2c-read not running
 ↳Set read/write permission for this access in Signal K administrator.
Checking Network... | access point disabled | NTP server not running
Checking serial connections alias...
 ↳There are serial connections with no alias assigned:
OpenCPN -> connection ID: 2 | device: /dev/ttyUSB0
Signal K -> connection ID: ttyUSB0 | device: /dev/ttyUSB0
Checking Dashboards... | Grafana running | Influxdb running | Telegraf running | SailGauge enabled
Checking OpenCPN... | running |  | autostart disabled | FP fullscreen autostart enabled
 ↳OpenCPN shortcut is broken, click "Install" in OpenCPN Installer app to rebuild it.
The default OpenCPN connection is missing and is not getting data from Signal K. Please create this connection in OpenCPN:
    Network
    Protocol: Signal K
    Address: localhost
    DataPort: 3000
    Automatic server discovery: not
Checking Signal K server... | running
Checking serial connections conflicts...
 ↳There are conflicts between the following serial connections:
    OpenCPN -> connection ID: 2 | device: /dev/ttyUSB0
    Signal K -> connection ID: ttyUSB0 | device: /dev/ttyUSB0
Checking network connections conflicts... | no conflicts
Checking GPIO conflicts... | no conflicts
CHECK SYSTEM FINISHED