+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: Weatherrouting (/showthread.php?tid=106)
Weatherrouting - Adde - 2016-05-18
My config: Openplotter V7 beta + OpenCPN V4.2
Now I try to install the add-on WeatherRouting OpenCPN, but I can not ... as well as other supplements.
RE: Weatherrouting - Sailoog - 2016-05-18
WeatherRouting and the rest of plugins should be installed, just activate.
RE: Weatherrouting - Arwen - 2016-05-18
I do not understand on my computer I can turn on without problems, but in Openplotter I can not.
I also tried installing them in Rasbian, but this one tells me they are already installed.
RE: Weatherrouting - e-sailing - 2016-05-18
You went to options
selected the "plugin" Page
selected a plugin and then you couldn't push enable button on the right side?
If you work on low resolution, opencpn hides sometimes the enable/disable button. Try to use remote desktop with higher resolution (Ultra vnc viewer or mstsc.exe ...).
RE: Weatherrouting - Adde - 2016-05-20
(2016-05-18, 09:42 PM)e-sailing Wrote: You went to options
selected the "plugin" Page
selected a plugin and then you couldn't push enable button on the right side?
If you work on low resolution, opencpn hides sometimes the enable/disable button. Try to use remote desktop with higher resolution (Ultra vnc viewer or mstsc.exe ...).
I just did a test with VNC on my laptop, increasing the screen resolution to the maximum, but I still have no access to the "Activate" button
RE: Weatherrouting - SkipperEarly - 2016-05-20
I would look for a HDMI screen and switch the plugin on there but if this is no option:
look for the opencpn.ini file and set the
[PlugIns/weather_routing_pi.dll]
bEnabled=1
good luck!
RE: Weatherrouting - Adde - 2016-05-25
(2016-05-20, 08:11 AM)SkipperEarly Wrote: I would look for a HDMI screen and switch the plugin on there but if this is no option:
look for the opencpn.ini file and set the
[PlugIns/weather_routing_pi.dll]
bEnabled=1
good luck!
Thank you to SkipperEarly for his message, which allowed me to explore the issue.
And here is what I found a picture because my English is not very good ...
Remember to save the file after modification.