+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4)
+--- Thread: [SOLVED] AP RPi2 (/showthread.php?tid=1197)
Pages:
1
2
RE: AP RPi2 - Sailoog - 2018-06-18
An AP mode for RPi 2 will be added on next OP update.
RE: AP RPi2 - Sailoog - 2018-06-21
An AP mode has been added in OP v1.0.2, test please and reopen this thread if necessary.
RE: [SOLVED] AP RPi2 - CVL - 2018-06-22
Tried and works! great, thanks a lot. :-)
RE: [SOLVED] AP RPi2 - Amaric - 2019-08-01
Is there a way of obtaining the Openplotter V1.0.2 as an image, tried the update route but keeps failing.
Also could you please elaborate on the config /etc/* changes that you made.
I have a RPi2 with the same AP issue on V1.0.0 image.
Many Thanks
Colin
RE: [SOLVED] AP RPi2 - CVL - 2019-08-01
(2019-08-01, 02:21 PM)Amaric Wrote: Is there a way of obtaining the Openplotter V1.0.2 as an image, tried the update route but keeps failing.
Also could you please elaborate on the config /etc/* changes that you made.
I have a RPi2 with the same AP issue on V1.0.0 image.
The different updates are not available as an image, as far as I know. The networking stuff in /etc/* is plain raspian, OP has just scripts changing the config files according to the settings in OP network-tab. So you can edit these files directly, if necessary.
I took my RPi2 off the boat and connected at home to Ethernet to have the update running through. Otherwise you can also hook up a mobile phone on usb. The latest available update works well on my installation.
fair winds
Christian
RE: [SOLVED] AP RPi2 - Amaric - 2019-08-02
I have tried the update route, all seems well apart from when there is a choice at the end.
install new configuration
or keep old which is also default 'N'
I assumed it is new as would expect, then appear to have error and return to exit requested.
I am out cruising and these updates are eating my data. So any pointers appreciated.
I did notice a fresh desktop view when rebooted, but openplotter still only has RPi3 in network.
Thanks. Colin
RE: [SOLVED] AP RPi2 - CVL - 2019-08-04
Hi Colin,
I am afraid, I can't help you any further, as I did the update summer 2018, so it's not fresh in memory. And I will be offline for the next three weeks.
Hope someone else can kick in.
fair winds
Christian