TCP nmea over ethernet: Maximum clients - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: TCP nmea over ethernet: Maximum clients (/showthread.php?tid=1258) |
TCP nmea over ethernet: Maximum clients - AndyBa - 2018-06-18 Is there a limit to the number of wifi clients that the OpenPlotter TCP server on a pi3B will support, feeding nmea 0183 (kplex?) data? Are individual active apps on tablets, or just individual tablets counted as a single client? Hopefully this last question makes sense? Thanks, and apologies if this is the wrong board! RE: TCP nmea over ethernet: Maximum clients - jim321 - 2018-06-19 just individual tablets each machine gets its own ip wireless or ethernet. from the sever "Is there a limit to the number of wifi clients " its a hundreds or more. non issue.. RE: TCP nmea over ethernet: Maximum clients - AndyBa - 2018-06-19 Thanks Jim. That's good. My reason for asking is that my existing hardware, a USR-TCP232-500 serial to Ethernet converter has a limit (for some reason) of 5 clients per port. RE: TCP nmea over ethernet: Maximum clients - jim321 - 2018-06-19 USR-TCP232-500 serial to Ethernet converter has a limit (for some reason) of 5 clients per port i am unfamiliar with that hardware. maybe the 5 clients were meant for sharing a printer? should only need one client for the serial the rpi.. then it can share to any number of devices with SK.. |