WIFI konfiguration - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: WIFI konfiguration (/showthread.php?tid=1275) |
RE: WIFI konfiguration - Serge - 2018-06-27 (2018-06-27, 04:00 PM)jim321 Wrote: you should give more info to get help rpi model version of op ect I try with Raspberry Pi 3+ and Openplotter v1.0.0. Can not connect my wifi with this configuration. I would update to 1.0.1 but do not know where I can get the download. Can not use the update without wifi. RE: WIFI konfiguration - Luckbert - 2018-06-27 Hi, can you connect your pi to a LAN? regards RE: WIFI konfiguration - Serge - 2018-06-27 Can not connect to LAN. The only screen I have is on the one on bord. RE: WIFI konfiguration - e-sailing - 2018-06-27 The update to V1.0.1/V1.0.2 wouldn' t help you to get both (ap and client) working on the internal Rpi3b+. When the raspbian firmware fixes this issue it could work. At the moment this mode does only work on the Rpi3b!!! So you need an additional wlan stick to get a connection to the internet or you use your smartphone's wifi or GSM (connect it via usb to the raspberry pi and start tethering mode). RE: WIFI konfiguration - Serge - 2018-06-28 (2018-06-27, 10:34 PM)e-sailing Wrote: The update to V1.0.1/V1.0.2 wouldn' t help you to get both (ap and client) working on the internal Rpi3b+. When the raspbian firmware fixes this issue it could work. At the moment this mode does only work on the Rpi3b!!! Thank you for the information. Something more I do not have to try with the 3 B Plus? RE: WIFI konfiguration - Serge - 2018-07-06 Are you able to run VNC under 3B+? I cannot get an connection (connection to network error) and wondering about, if it can be the same problem than with the WIFI connection to the marina. I tried to connect from Ipad to the shown WIFI Network openplotter, got the Password window, filled in, sure it is right and get the failure. RE: WIFI konfiguration - Serge - 2018-07-07 Or other question. Is there somebody who is able to user VNC with a PI 3B+? If yes, which version of the openplotter are you using? RE: WIFI konfiguration - e-sailing - 2018-07-07 difference 3b /3b+ 3b: 2.4 GHz only / working as AP and client (to get a better reach/speed I would prefer a usb wifi device freely positionable) 3b+: 2.4 GHz and 5 GHz / working as AP or as client VNC does work on both. This is standard headless remote control used by many users. Openplotter imagenetworki does use standard raspbian + standard raspbian modules (hostapd, dnsmasq, bridge-utils) thats all. It doesn't overwrite individual settings (as 0.10-0.17 did) on every boot. It doesn't use special network libraries (as 0.10-0.17 used network manager) Your situation: - you see openplotter AP on your ipad - you are connected to openplotter ap - you can open the signalk dashboard on the ipad (browser address 10.10.10.1:3000) then you should be able to use realvnc RE: WIFI konfiguration - jim321 - 2018-07-07 you need to use realvnc viewer. https://www.realvnc.com/en/connect/download/viewer/ v1.0 changelog "Removed RDP and x11vnc. Now RealVNC is the only supported system for remote desktop" RE: WIFI konfiguration - Serge - 2018-07-07 I use Realvnc viewer on the ipad. I see the WIFI openplotter in the configuration für WIFI on the ipad, but can not connect because wrong password or network failure. On the PI I see only two blue arrows in the top and no wireless interface found. Can not connect to WIFI of Marina because of WIFI fealure in 3+ Firmware e-sailing told me. On the Realvnc on the ipad I see only no computer. Whrere I can find signalk dashboard. When I fill in the IP in the browser it shows nothing, just tell me he can not connect to the internet. |