+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: WIFI konfiguration (/showthread.php?tid=1275)
RE: WIFI konfiguration - e-sailing - 2018-07-08
Quote:I see the WIFI openplotter in the configuration für WIFI on the ipad, but can not connect because wrong password or network failure
That's your problem.
You aren't connected to openplotter. You can set the AP password on the network tab. Default is "12345678".
Quote:On the PI I see only two blue arrows in the top and no wireless interface found.
That's OK. The wireless interface is bound to the AP.
RE: WIFI konfiguration - Serge - 2018-07-08
Sorry, can not connect, wrong password again. I changed to my passwort already before. Now I set on the standard 12345678 again and tried after saving. It is shown in the warning that I use the standard WIFI passwort, but cannot connect with it.
RE: WIFI konfiguration - jim321 - 2018-07-08
try this from terminal
ifconfig
post results from uap0 and wlan0
RE: WIFI konfiguration - Serge - 2018-07-08
uap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.10.10.1 netmask 255.255.255.0 broadcast 10.10.10.255
inet6 fe80::ba27:ebff:fe7f:f949 prefixlen 64 scopeid 0x20<link>
ether b8:27:eb:7f:f9:49 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 335 bytes 26680 (26.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether b8:27:eb:7f:f9:49 txqueuelen 1000 (Ethernet)
RX packets 9 bytes 1270 (1.2 KiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 27 bytes 4270 (4.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
pi@openplotter:~ $
RE: WIFI konfiguration - jim321 - 2018-07-08
that looks ok.
it should work..
i have a 3b and not a 3+ so cant test any further.
RE: WIFI konfiguration - e-sailing - 2018-07-08
You choose a network configuration for the 3B but you have a 3B+ why???
Choose one of the three configurations for 3B+!
RE: WIFI konfiguration - Serge - 2018-07-08
Sorry, because I do not know that there is a difference in the configuration. I just tried to follow the documentation but was not sucessful. Which are the configurations for 3B+ or where can I find them?
Ok, found in the drop down, do not notice that it means the 3B+, only 3+. I´m on the WIFI openplotter now, but still do not get the client connected to the PI. Get an failure that the server is not connected to internet for the test.
RE: WIFI konfiguration - e-sailing - 2018-07-08
One of the four "RPi3+:" configurations see documentation:
https://docs.sailoog.com/openplotter-v1-x-x/network
first picture
RE: WIFI konfiguration - Serge - 2018-07-09
So, bin jetzt mit dem AP verbunden und auch im vnc hat alles funktioniert.
Danke für Eure Hilfe!
Serge
RE: WIFI konfiguration - Serge - 2018-07-10
So I will continue. Connection of my Multiplexer was easy under Seriell. GPS and AIS-Data running now in OpenCPN.
The thing I want to do now is to bring the wifi stick working. Are there some instructions under openplotter I can follow? I have simple TP-Link Mini Wireless USB Adapter.