Issue on boot up - Printable Version

Issue on boot up - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Issue on boot up (/showthread.php?tid=1283)

Issue on boot up - addboy - 2018-06-29

On booting up in the opening windowI get “there are some warnings. Please close this window and check your system” is this for still useing the default password? Also I have installed the Sailoogs hat and do not air temp or barametric pressure reading in the dashboard in openCPN. I have run SK diagnostics in I2C and see a value being reported.

RE: Issue on boot up - PaddyB - 2018-06-29

(2018-06-29, 08:30 AM)addboy Wrote: On booting up in the opening windowI get “there are some warnings. Please close this window and check your system” is this for still useing the default password? Also I have installed the Sailoogs hat and do not air temp or barametric pressure reading in the dashboard in openCPN. I have run SK diagnostics in I2C and see a value being reported.

Aren't the warnings listed in the window above the warning? To get the data into opencpn you'll probably need to turn on Signalk - NMEA in signalk - http://10.10.10.1:3000 then go into server>plugin config>Convert Signal K to NMEA0183

[Image: calAr7e.png]

RE: Issue on boot up - addboy - 2018-06-29

I went into tool, option, connection and added a network connection with TCP at 10.10.10.1:3000 and restarted openCPN. Still not showing anything on dashboard?
Thx

RE: Issue on boot up - PaddyB - 2018-06-29

(2018-06-29, 12:42 PM)addboy Wrote: I went into tool, option, connection and added a network connection with TCP at 10.10.10.1:3000 and restarted openCPN. Still not showing anything on dashboard?
Thx

No point doing that, the signalk server broadcasts signalk data to that port, not NMEA0183. Click the bottle in the water icon top left of the screen and it will open a webpage to the signalk dashboard, then you can select server > plugin Config > convert signalk to NMEA to set up what sentences you want to be transmitted as NMEA

[Image: FANOPst.png]

RE: Issue on boot up - jim321 - 2018-06-29

(2018-06-29, 12:42 PM)addboy Wrote: I went into tool, option, connection and added a network connection with TCP at 10.10.10.1:3000 and restarted openCPN. Still not showing anything on dashboard?
Thx

it's 10.10.10.1:10110