Missing BRG and COG on B&G Network Nav cockpit display - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Missing BRG and COG on B&G Network Nav cockpit display (/showthread.php?tid=155) |
Missing BRG and COG on B&G Network Nav cockpit display - first317 - 2016-06-30 hello again, I ve got a B&G Network Nav Display as GPS Display connected to a Rs422 serial2usb adapter on my Rpi. In open plotter i added a Serial output to the B&G Display. SOG and DTW are on the display, but COG and BEaring to waypoint are missing. The B&G shows only off. RE: Missing BRG and COG on B&G Network Nav cockpit display - first317 - 2016-07-30 Hey, doesnt have anybody a hint to solve my Problem i tried many configurations and send different NMEA sentence. but still COG and BTW is missing. http://www.chicagomarineelectronics.com/Documents_B&G/Net/Network%20Nav%20User%20Manual.pdf In the Manual is described what kind of Sentences are accepted. I think **RMC is the right one. In the Inspector i see that the GPS Dongle makes the sentence. I configured the Serial Output for connecting with the B&G Network without any Filters. everthing works expect the COG and BTW.... I hope anyone can help me RE: Missing BRG and COG on B&G Network Nav cockpit display - e-sailing - 2016-08-02 Have you seen this? http://www.cruisersforum.com/forums/f121/b-and-g-network-nav-problem-46917.html Perhaps he solved the problem. Have you test that you really get an RMB sentence? (for Bearing to Waypoint) COG and SOG are in the same sentence. I don't understand, that you only have SOG. Please make sure that you have activate 0183(V1.5) in the setup and not 0180. You can test your device by using a terminal program and copy and paste NMEA sentences to it. Or directly connect a GPS sensor to the B&G display. |