Wind Sensors - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Wind Sensors (/showthread.php?tid=1553) |
RE: Wind Sensors - rastam4n - 2020-12-11 (2020-12-11, 09:24 AM)Geronius Wrote: you probably missed checking the box at the bottom of the page to agree to the code of conduct. Thanks for the link Michael! That was enough information for me to find the sensors on 2 different suppliers. I think this project is going to cost more in shipping than in parts! But I am not doing this to save money, just trying to learn. I did check the code of conduct box, I have a feeling that since the page is getting translated maybe it's reporting back incorrectly. Thanks again Peter (2020-12-11, 01:35 PM)norbert-walter Wrote: Peter you find on Gitlab in the documents my email address. You can me also contact via email. Thank you. I will email you with any questions kind regards Peter RE: Wind Sensors - jim321 - 2020-12-11 rastam4n keep us updated if you find the parts or alternatives. RE: Wind Sensors - rastam4n - 2020-12-17 (2020-12-11, 10:28 PM)jim321 Wrote: rastam4n keep us updated if you find the parts or alternatives. I found the Hall Effect Sensors, unfortunately neither of the suppliers have both. https://www.mouser.ca/ProductDetail/honeywell/sm451r/?qs=E%252bZugfkfcz4V8OifjOH4xQ==&countrycode=CA¤cycode=CAD https://www.semiconductorstore.com/cart/pc/viewPrd.asp?idproduct=103012 Working with Norbert to get the PCB ordered. |