+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Update problem on RPi 3+ (/showthread.php?tid=1698)
RE: Update problem on RPi 3+ - Luckbert - 2019-04-18
Hallo zusammen,
Ich habe heute auch versucht, ein neues OP 1.0.0 auf 1.2.0 zu aktualisieren.
Vor dem Update habe ich
Code:
sudo apt-mark hold hostapdausgeführt wird.
Leider ist ein Bleich aufgetreten.
wegen der Länge habe ich die Fehler in eine Textdatei geschrieben. Siehe Anhang.
Vielleicht kannst du damit etwas anfangen.
Grüße Jürgen
RE: Update problem on RPi 3+ - jim321 - 2019-04-19
i had the same thing happen to me try this
sudo apt-mark unhold hostapd ......not needed if you didn't put in on hold
sudo systemctl enable hostapd.service
sudo nano /home/pi/.openplotter/openplotter.conf
change version = 1.2.0 to 1.0.0, mine was blank after update fail.
ctrl x y enter
reboot
try update again
RE: Update problem on RPi 3+ - Luckbert - 2019-04-19
Hello, Jim,
Thanks for the tip.
I was able to update my system now.
But first I had to
Code:
sudo apt-mark hold hostapdand then insert your line
Code:
sudo systemctl enable hostapd.serviceI didn't have to change the version number. Since the update failed it is still 1.0.0.
Now everything seems to be fine.
Thanks again.
Greetings Jürgen
RE: Update problem on RPi 3+ - affinite - 2019-05-06
(2019-04-19, 10:30 AM)jim321 Wrote: i had the same thing happen to me try this
sudo apt-mark unhold hostapd
sudo systemctl enable hostapd.service
sudo nano /home/pi/.openplotter/openplotter.conf
change version = 1.2.0 to 1.0.0, mine was blank after update fail.
ctrl x y enter
reboot
try update again
Jim
I too had trouble upgrading from 1.0.2 but your steps worked for me so thanks
Steve
RE: Update problem on RPi 3+ - Alexcal84 - 2019-05-09
Thanks Jim321 and Luckbert,
I had the same problem and your solution works perfectly also for me:
sudo apt-mark hold hostapd
sudo systemctl enable hostapd.service
Reboot and try update again.
RE: Update problem on RPi 3+ - jim321 - 2019-05-09
i dont think you need to mark hold on hostapd
just enable the hostapd.service
RE: Update problem on RPi 3+ - Ratsea - 2020-10-22
I know this is an old thread but I too am having a problem upgrading a version 1.0.0 to 1.2. I want this as well as a version 2, which is fine.
Version 1 is much simpler for 0183 NMEA only streams.
The problem is a PYTHON compatibility problem, as when using the upgrade tool for 1.0 to 1.2, I get the following below.
Is there any solution?
Richard
UPDATING PYTHON PACKAGES...
Searching for pip
Best match: pip 9.0.1
Adding pip 9.0.1 to easy-install.pth file
Installing pip script to /usr/local/bin
Installing pip2.7 script to /usr/local/bin
Installing pip2 script to /usr/local/bin
Using /usr/lib/python2.7/dist-packages
Processing dependencies for pip
Finished processing dependencies for pip
Collecting paho-mqtt
Using cached https://files.pythonhosted.org/packages/32/d3/6dcb8fd14746fcde6a556f932b5de8bea8fedcb85b3a092e0e986372c0e7/paho-mqtt-1.5.1.tar.gz
Collecting pyudev
Using cached https://files.pythonhosted.org/packages/72/c8/4660d815a79b1d42c409012aaa10ebd6b07a47529b4cb6880f27a24bd646/pyudev-0.22.0.tar.gz
Collecting pyrtlsdr
Using cached https://files.pythonhosted.org/packages/db/88/6855834021364b38885e9aed0f231fc10d5f419bc3446e1d2bf39b9405d0/pyrtlsdr-0.2.92-py2.py3-none-any.whl
Collecting pynmea2
Using cached https://files.pythonhosted.org/packages/ca/6b/5009ac42b1f21fee5b68151e5536b03dc6ca5e5346a23fc943860680d91b/pynmea2-1.15.0.tar.gz
Collecting twython
Using cached https://files.pythonhosted.org/packages/b7/2c/fb17cb309fccd4e63638715325768bd959b0ad78b23b0cbc0738f5fc8c58/twython-3.8.2.tar.gz
Complete output from command python setup.py egg_info:
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-build-T_Ycjz/twython/setup.py", line 33, in <module>
long_description=open('README.md', encoding='utf-8').read() + '\n\n' +open('HISTORY.md', encoding='utf-8').read(),
TypeError: 'encoding' is an invalid keyword argument for this function
----------------------------------------
Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-T_Ycjz/twython/ (IN RED)