export NMEA data - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: export NMEA data (/showthread.php?tid=177) Pages:
1
2
|
export NMEA data - Swokey - 2016-08-02 Hi, I want to save every x minutes the NMEA data to a file or sqlite database. Found that you can save data with kplex to a file, but can't find the configuration file. Where can I find the configuration file? Or is there a better way to save the NMEA data ever x minutes? Swokey RE: export NMEA data - Sailoog - 2016-08-02 kplex is a good option. Click on "Advanced" in NMEA 0183 tab and the config file will open. VDR plugin for opencpn will do also the task. RE: export NMEA data - Arne - 2016-08-24 (2016-08-02, 09:09 AM)Swokey Wrote: Hi, I'm using custom actions triggered every x minutes/seconds to update a RRDTOOL database with NMEA data (temperatures, wind), then using the data to plot readings later on. I have written a few words about it at my boats website, it's in Norwegian but feel free to ask if the images are not sufficient to get the drift? :-) RE: export NMEA data - Sailoog - 2016-08-25 Nice!!! RE: export NMEA data - PaddyB - 2016-08-25 (2016-08-24, 08:00 PM)Arne Wrote: I'm using custom actions triggered every x minutes/seconds to update a RRDTOOL database with NMEA data (temperatures, wind), then using the data to plot readings later on. Arne, fantastic, thanks for the link and taking some time to write it up - I've wondering abouty how to do just this for some time. RE: export NMEA data - PaddyB - 2016-09-07 Up and running, thanks for the message about rrdtools. I couldn't get the command line working to directly update the database but used the command line to call a bash script instead which seems to be working OK. Sent from my SGP511 using Tapatalk export NMEA data - PaddyB - 2016-09-14 So saving data mostly up and running now with a Web page to pick what you want to look at and from when to when. Not at all difficult with openplotter actions. https://youtu.be/_r3--A_d3RE Sent from my SGP511 using Tapatalk RE: export NMEA data - Arne - 2016-11-07 Well. I managed to corrupt my original SD-card and had to reinstall more or less from scratch, so I figured it would be just as well to try out the 0.9.0-build. I have installed and set up everything, and am kind of getting into the changes from earlier versions, but I have problems getting the data out to my RRD db's using my custom actions. Have the variables changed name, which should I use here for the 1-wire sensors? Name, as before, ENGINE, EXHAUST, INSIDE - seems not to work? Signal K full string? propulsion.ENGINE.coolantTemperature ? or what? RE: export NMEA data - PaddyB - 2016-11-08 Quote:(2016-11-07, 08:35 PM)Arne Wrote: Well. I managed to corrupt my original SD-card and had to reinstall more or less from scratch, so I figured it would be just as well to try out the 0.9.0-build. RE: export NMEA data - Arne - 2016-11-08 Quote:I'm using the short variable names from the nmea inspector.And you're using the 0.9.0 alpha/development build, not the regular 0.8.0? |