Server Hardware for openplotter? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Server Hardware for openplotter? (/showthread.php?tid=1807) |
RE: Server Hardware for openplotter? - jamieFL - 2020-08-27 Thomas, Has the new stable Pi update been released yet that fixes the firmware issue? jamieFL RE: Server Hardware for openplotter? - mgrouch - 2020-09-08 My extensive wishlist for a boat computer card: The wishlist is inspired by MCC board (https://github.com/Thomas-GeDaD/openplotter-MCS/blob/master/QuickGuide_MCS.pdf), as well as CarPiHat, number of SupTronics boards, Moitessier Hat, PiJuice, SixFab boards,.
See also: https://bareboat-necessities.github.io/my-bareboat/boat-computer-wishlist.html Thanks, MG RE: Server Hardware for openplotter? - glowntiger - 2020-09-10 (2020-08-27, 09:13 PM)jamieFL Wrote: Thomas, Sorry for the late answer. Yes you can update. all works fine. RE: Server Hardware for openplotter? - flybob - 2020-09-11 An update to my issue regarding stlk-fail: Due to HW failure I changed from a ST6000+ to a ST6001+, still same problem when connecting the MCS board, Seatalk fail is displayed. After adding a pull-up of 100k on the digital input everything works fine! Now I am hoping for any kind of advice on how to get the ST1 output available RE: Server Hardware for openplotter? - Max1947 - 2020-09-12 Ciao Thomas, I tried to configure your new Plugin but it gives me an error ... but I ask do I need it? It's already set up all right from your card ... sorry but SK for me is a nice puzzle ... You see: https://i.imgur.com/ioCxLSZ.png https://i.imgur.com/pT8g2JD.png Update Oops! I just saw your comment in the other forum ... so alright! https://www.segeln-forum.de/board194-boot-technik/board35-elektrik-und-elektronik/board195-open-boat-projects-org/73843-raspberry-schnitstellen-openplotter-signalk-marinecontrolserver/index14.html#post2200959 RE: Server Hardware for openplotter? - glowntiger - 2020-09-22 Here you find informations of the updatet 1.5 board...: https://www.gedad.de/2020/09/20/gedad-mcs-update-to-1-5/ Key facts: Already available: • Easy-to-use all-round adapter board for Marine application • Combines different interfaces • Usable with Raspberry Pi 3,4 • Large inpu tvoltage range(8-28V) • Integrated 5V Power adapter • Autoshutdown for power down the Pi and shutdown the board • 6x NMEA0183® compatible interfaces (configurable as input or output) • 1x NMEA2000® compatible interface • 1x 1-Wire® interface with real 1-Wire® standard • 1x 5V tolerant I²C® interface • 4x digital Inputs • Ready to use open source app for OpenPlotter Whats New?: • SignalK Intigration • Sealtalk1 reading • Frequenz measurement (through In1-In4) for RPM / Frequenz (Terminal W of the Alternator or Sensor) (at the moment only intigrated in Openplotter) Whats planed?: • I/O board with 8 Inputs (8-28V) and 8 Outputs (8-28V / 500mA) • Analog Input board with 4 Inputs. For measure Voltage 12V, measure Shunt diff Voltage and measure Sensor Inputs (0-300Ohm) => It is possible to wire 4 of this boards to the MCS • Compass and Sensor board RE: Server Hardware for openplotter? - mgrouch - 2020-09-24 May be add relays for nav/running/anchor lights? With an API. Thanks, —MG RE: Server Hardware for openplotter? - glowntiger - 2020-09-24 Hi, I worked on it. But I do this directly in SignalK... Further the Same for the I/O Boards... :-) See here... : https://github.com/Thomas-GeDaD/SignalK_raspberry_MCS/tree/Intigrate-IN1-In4 RE: Server Hardware for openplotter? - gniersma - 2020-09-24 If Possible please add Seatalk1 Write thx G RE: Server Hardware for openplotter? - flybob - 2020-09-24 (2020-09-24, 06:29 PM)gniersma Wrote: If Possible please add Seatalk1 Write The dream functionality! |