OpenPlotter 2 roadmap - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: OpenPlotter 2 roadmap (/showthread.php?tid=1992) |
RE: OpenPlotter 2 roadmap - Sailabout - 2019-11-28 (2019-11-27, 12:29 PM)Sailoog Wrote:(2019-11-25, 06:14 PM)Sailoog Wrote:(2019-11-24, 07:43 AM)Sailabout Wrote: I do not seem to find the way to stop the display to go blank after a while of inactivity (OpenPlotter v2 beta on RPi 3, from NOOBS dated 2019-11-15). Thanks RE: OpenPlotter 2 roadmap - e-sailing - 2019-11-28 Quote:Hi E-sailing. Done that and it partly works. "I do not understand what is the difference between connecting via the wireless network router or direct." The difference is: On the boat your wireless network router is the marina wifi. When you sail away. You will lose this connection! When OpenPlotter works as a wireless router (AP). You will have a connection to your local data all the time. When you come to a marina you can connect openplotter to the marina wifi. Now OpenPlotter is connected to the internet. (But it isn't automatically forwarded to your kindle or mobile. To forward this connection you have to set the share option to the right network. Select "auto" instead of a network and it should pick up the right network.) So the difference is when you connect to openplotter instead of your wireless network router to get an internet connection, that openplotter only forward the internet traffic but directly handles the boat data. The idea is, that the whole crew on the boat can stay connected to OpenPlotter independend where you are. RE: OpenPlotter 2 roadmap - Max1947 - 2019-11-28 (2019-09-14, 06:33 PM)Sailoog Wrote: OpenPlotter 2 is in beta stage. Now OP consists of independent applications. For the first time, we open the door to the entire Debian family and even to other hardware. However, the most interesting applications remain exclusive for Raspberry. Ciao, progressi con le app? RE: OpenPlotter 2 roadmap - Sailoog - 2019-11-28 (2019-11-28, 04:05 PM)Max1947 Wrote: Ciao, progressi con le app? A lot, almost all apps are close to "stable" stage. Check the new images and NOOBS files. Working on openplotter-serial now. RE: OpenPlotter 2 roadmap - Max1947 - 2019-11-28 (2019-11-28, 04:15 PM)Sailoog Wrote:(2019-11-28, 04:05 PM)Max1947 Wrote: Ciao, progressi con le app? RE: OpenPlotter 2 roadmap - Lazzz - 2019-12-03 (2019-11-22, 11:07 AM)Sailoog Wrote:(2019-11-22, 12:53 AM)rastam4n Wrote: I do have the correct driver/firmware installed and when I installed it via cmd line I get no errors... yet I still do not get any data from either an IMU or Moiteisser Hat or even a usb gps reciever unless I connect to the gps reciever directly in OpenCPN, if I try to connect via signalK I get nothing... I cannot determine if it is just broke... and then I will just wait... or if my set up is broke... to me it looks fine but maybe I am missing something... I understand this is free and all and I really do appreciate all the work that goes into this but yet, if there is no clear instructions, and no communication about what is working and what is not... it kinda defeats the purpose of testing no? Like what does that mean anyhow.. hear are the drivers but they are only for testing.. does that mean they don't work? Or does that mean they work but don't go sailing with them... I suspect is is the later which leaves me stumped as to why signalk seems broken since the inception of OP2 First off thanks for a fantastic effort in getting this up & running. I have just up graded to a Rpi4 & the latest beta version of OP. I must be missing something!! I am getting the GPS & I2C to OpenCPN but cannot get anything from IMU. What connections should I have in Signal K?? - Could someone post a screenshot of the connections tab. I am not getting anything in SK from the IMU at all. I read where You have to create UDP localhost port 52000 to get IMU data in SK - but I don't think I am doing it right!! Looking forward to the release of Actions & 1W sensors. RE: OpenPlotter 2 roadmap - Sailoog - 2019-12-03 openplotter-pypilot app is in charge of managing the IMU. The current version is just an approach and it will suffer big changes these days. RE: OpenPlotter 2 roadmap - FoxyKitty - 2019-12-04 Just installed on my RPi4 - very straightforward with the NOOBS image, thanks! However, tide stations are not showing. I do have the HARMONIC.IDX file applied as an active data connection. Any ideas? RE: OpenPlotter 2 roadmap - fishy - 2019-12-04 Just installed the latest version from scratch (on Pi4, Buster), pretty straightforward process, looking good! Thanks for that. I find that the file manager process dies immediately after starting- is this a bug on my implementation, or a known issue? Also, I've installed the Moitessier HAT, PyPilot and I2C, but so far failed to get any data from the HAT. The Moitessier status window finds it without problems though. Should I wait for serial devices to get data from the HAT to OpenCPN? Thanks for the hard work! RE: OpenPlotter 2 roadmap - dione - 2019-12-04 I have seen that nodered, influxdb and grafana have been added What is the way to access nodered and other programs? I see that in signal k, to access nodered asks me for a username and password Saludos |