LCD not working after git update - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: LCD not working after git update (/showthread.php?tid=1998) |
LCD not working after git update - rmvdmrl - 2019-09-19 Hi Sean, Perhaps I'm doing something totaly wrong but after updating the latest image version 28062019 today with Github (as i've seen you did the +/- 10 buttons) the display is stuck at the bootlogo. I do have the webinterface and I can see it is reading the IMU, i can do level calibration but can not switch the ap on. Have tried both git pull and git clone but with the same result. Hope you can have a look. Greetings and thanks Rob RE: LCD not working after git update - seandepagnier - 2019-09-20 Did you update git on the tinypilot? I broke the lcd, and just fixed it a few days ago in git. I will push my changes soon, there are many more bugs fixed. I am due to release a new tinypilot image as well. RE: LCD not working after git update - rmvdmrl - 2019-09-20 Hi Sean, Thanks for your reply. I have seen there where quit some changes (including the +/- 10 and basic setup for RF) I will just wait and switch back to the previous image. Greetings Rob |