Raspberry Pi 4 - Tryng to get OP to work - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Raspberry Pi 4 - Tryng to get OP to work (/showthread.php?tid=2081) |
Raspberry Pi 4 - Tryng to get OP to work - SailorMacSailface - 2019-11-11 Hello dear people, I recently decided to give openplotter a try and since the Pi 4 just got released I got one of these to be a bit more future proof. However I am a bit hardware challenged at the moment, meaning that my only option is to have the Pi work headlessly. ( unfortunately I cannot even connect with an Ethernet cable ). So I was hoping that I could connect via the Pi's Wifi access point. It seems that the OP V1 version does not work with this hardware ( I only see a red light, no green light flasing and I do not see any networks ) With the beta of V2 I get to see green blinkenlights, but alas no network showing up either. Did anyone here get the Pi V4 to work yet? Thanks a lot! RE: Raspberry Pi 4 - Tryng to get OP to work - MatsA - 2019-11-13 (2019-11-11, 03:55 PM)SailorMacSailface Wrote: Hello dear people,Hi ! OP V1 is running Stretch so don't work with RPi 4. OP V2 Beta works like a charm on RPi 4 !! Instructions !! RE: Raspberry Pi 4 - Tryng to get OP to work - SailorMacSailface - 2019-11-15 MatsA Hi ! OP V1 is running Stretch so don't work with RPi 4. OP V2 Beta works like a charm on RPi 4 !! Instructions !! Thank you. But how can I connect to the Pi without Ethernet? I would need it to be pre-configured as an access point so I could access it via Wi-Fi. Or is there an option to do that via USB? Thanks! RE: Raspberry Pi 4 - Tryng to get OP to work - SailorMacSailface - 2019-11-15 Ah. No worries found that: https://desertbot.io/blog/headless-raspberry-pi-3-bplus-ssh-wifi-setup |