+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: OP v2 and MQTT, Mosquitto and Node Red (/showthread.php?tid=2156)
OP v2 and MQTT, Mosquitto and Node Red - BartStevens - 2019-12-18
Hi all,
Been trying to get Node Red working with Wemos D1 (via EasyESP).
I've read a comment on the forum that OP V2 was not yet ready with MQTT (or Mosquitto?).
Can somebody elaborate? Is this true, or resolved, or ...?
Many thanks,
Bart
RE: OP v2 and MQTT, Mosquitto and Node Red - jim321 - 2019-12-18
it's a signalk plugin you can install from signalk
https://github.com/tkurki/signalk-mqtt-gw
or install mosquitto
https://randomnerdtutorials.com/how-to-install-mosquitto-broker-on-raspberry-pi/
RE: OP v2 and MQTT, Mosquitto and Node Red - BartStevens - 2019-12-19
(2019-12-18, 10:46 PM)jim321 Wrote: it's a signalk plugin you can install from signalk
https://github.com/tkurki/signalk-mqtt-gw
or install mosquitto
https://randomnerdtutorials.com/how-to-install-mosquitto-broker-on-raspberry-pi/
Thanks, will give it a shot!
Enjoy holidays
Bart
RE: OP v2 and MQTT, Mosquitto and Node Red - Sailoog - 2019-12-20
As you know OP2 is based on independent apps, openplotter-actions app will provide what you need. Still in development.
Follow the progress here: http://forum.openmarine.net/showthread.php?tid=1992