(OP2.0.19) openplotter-network 2.0.8 - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: (OP2.0.19) openplotter-network 2.0.8 (/showthread.php?tid=2180) |
(OP2.0.19) openplotter-network 2.0.8 - DomH - 2019-12-30 Hi, I run raspbian buster lite on RPI 4. OP is 2.0.19-beta OP-Network 2.0.8-beta pi@raspberrypi:~ $ openplotter-network Traceback (most recent call last): File "/usr/bin/openplotter-network", line 11, in <module> load_entry_point('openplotterNetwork==2.0', 'console_scripts', 'openplotter-network')() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 712, in main MyFrame().Show() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 80, in __init__ self.read_wifi_conf() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 341, in read_wifi_conf self.read_network_interfaces() File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 469, in read_network_interfaces ni = subprocess.check_output(('iw '+phy+' info').split()).decode(sys.stdin.encoding) File "/usr/lib/python3.7/subprocess.py", line 395, in check_output **kwargs).stdout File "/usr/lib/python3.7/subprocess.py", line 487, in run output=stdout, stderr=stderr) subprocess.CalledProcessError: Command '['iw', 'tota', 'info']' returned non-zero exit status 1. Thanks for your help RE: (OP2.0.19) openplotter-network 2.0.8 - Sailoog - 2019-12-30 This issue seems the same than this one: http://forum.openmarine.net/showthread.php?tid=2098 Do you have any USB device? RE: (OP2.0.19) openplotter-network 2.0.8 - DomH - 2019-12-31 Sorry for that, I search if the problem was already mentioned, but missed the post. Yes. I have the wifi antenna on the USB. When I remove it, it works I was then able to update wifi driver for the wifi antenna on USB and it is now recognised and everything seem to work (I will check different config I wish to have on board the next days) and come back if I have new problems. Thanks for your work and help. Happy new year. RE: (OP2.0.19) openplotter-network 2.0.8 - Sailoog - 2019-12-31 OK, thanks for reporting. We will try to fix this issue ASAP. Happy new year! RE: (OP2.0.19) openplotter-network 2.0.8 - benjic78 - 2020-01-01 (2019-12-31, 11:41 AM)Sailoog Wrote: OK, thanks for reporting. We will try to fix this issue ASAP. Happy new year! Bonjour, si cela peut aider, voici les erreurs que j'ai trouvé dans mes logs suite install openplotter network depuis rasbian dernière version Raspbian Buster with desktop: Linux raspberrypi 4.19.75-v7+ #1270 SMP Tue Sep 24 18:45:11 BST 2019 armv7l GNU/Linux Dans syslog: **pi@raspberrypi:~ $ tail /var/log/syslog** Jan 1 11:09:47 raspberrypi systemd[1]: hostapd.service: Scheduled restart job, restart counter is at 599. Jan 1 11:09:47 raspberrypi systemd[1]: Stopped Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator. Jan 1 11:09:47 raspberrypi systemd[1]: Starting Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator... Jan 1 11:09:47 raspberrypi hostapd[4927]: Configuration file: /etc/hostapd/hostapd.conf Jan 1 11:09:47 raspberrypi hostapd[4927]: Could not open configuration file '/etc/hostapd/hostapd.conf' for reading. Jan 1 11:09:47 raspberrypi hostapd[4927]: Failed to set up interface with /etc/hostapd/hostapd.conf Jan 1 11:09:47 raspberrypi hostapd[4927]: Failed to initialize interface Jan 1 11:09:47 raspberrypi systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE Jan 1 11:09:47 raspberrypi systemd[1]: hostapd.service: Failed with result 'exit-code'. Jan 1 11:09:47 raspberrypi systemd[1]: Failed to start Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator. HAPPY NEW YEAR !!! Et merci pour cette superbe idée V2 |