+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: (simple) network question (/showthread.php?tid=2199)
(simple) network question - BartStevens - 2020-01-04
Hi,
In OP2 network settings I see 2 types of AP settings
on board
AP and Station
What is the difference ...?
Bart
RE: (simple) network question - Sailoog - 2020-01-04
on board: you set the build in wifi device as access point
AP and station: you set the build in wifi device as access point and client at the same time. This will not work for all Raspberry models.
RE: (simple) network question - BartStevens - 2020-01-04
(2020-01-04, 07:33 PM)Sailoog Wrote: on board: you set the build in wifi device as access point
AP and station: you set the build in wifi device as access point and client at the same time. This will not work for all Raspberry models.
Sailoog this is to cryptic for me ... Will see if I can find a thread somewhere in the forum
I know it is related to this :https://docs.sailoog.com/openplotter-v1-x-x/network
But still ... I need to dive deeper in the difference between Client and AP
Bart
RE: (simple) network question - Luckbert - 2020-01-04
Hello,
A client could be described as a user of the network. The one who dials into the network.
The AP (Access-Point) is the device which provides the network.
(The router at home is an AP)
So understandable?
Greetings Luxi
RE: (simple) network question - BartStevens - 2020-01-04
(2020-01-04, 09:23 PM)Luckbert Wrote: Hello,
A client could be described as a user of the network. The one who dials into the network.
The AP (Access-Point) is the device which provides the network.
(The router at home is an AP)
So understandable?
Greetings Luxi
Excellent ...
Thanks,
Bart