Can I use the IMU sensor GY-511 with LSM303DLHC with Openplotter? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Can I use the IMU sensor GY-511 with LSM303DLHC with Openplotter? (/showthread.php?tid=240) |
Can I use the IMU sensor GY-511 with LSM303DLHC with Openplotter? - kste - 2016-12-10 HI I have the IMU sensor GY-511 with LSM303DLHC, I tried to connect it, and is seen by i2cdetect but is not recognized at all by Openplotter, can I configure the software to use this? RE: Can I use the IMU sensor GY-511 with LSM303DLHC with Openplotter? - e-sailing - 2016-12-14 No. You need minimum a 9 dof. Have a look into the readme of the library https://github.com/sailoog/RTIMULib2/blob/master/README.md. If you add a L3GD20H it should work. |