OpenMarine
How to configure SignalK - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: How to configure SignalK (/showthread.php?tid=2691)

Pages: 1 2

How to configure SignalK - Max1947 - 2020-06-26

After the last update to SignalK 1.31.0, the lives of us mortals have complicated. OpenCPN no longer receives signals from SK. I understand that everything must be configured but without adequate instructions it has become almost impossible. If you then google to translate the technical terms in an absurd way it's done. I don't want to give up on OP but it's hard!  
However, help is always welcome. Good wind!  Huh Cool


[img][Image: gEQ4bt.png][/img]

How to configure SignalK - tkurki - 2020-06-27

What are you specifically talking about? Nothing significant has changed in how things are configured in recent SK server updates.


Sent from my iPhone using Tapatalk

RE: How to configure SignalK - Max1947 - 2020-06-27

(2020-06-27, 06:31 AM)tkurki Wrote: What are you specifically talking about? Nothing significant has changed in how things are configured in recent SK server updates.


Sent from my iPhone using Tapatalk

Hi Tkurki, sorry for the outburst, for example as you can see from the photo "rool and pitch" are no longer transmitted in OpenCPN. Sensors and pypilots have long been configured and have always transmitted well. All on Pi4 with Moitessier and aggioirnamenti facts.  Sad

https://i.imgur.com/YKebsUe.png
https://i.imgur.com/T0O1qQt.png

RE: How to configure SignalK - PaddyB - 2020-06-27

Install the @signalk/signalk-to-nmea0183 app, select XDR and activate >

[Image: hQ1Uj2S.png]

RE: How to configure SignalK - Max1947 - 2020-06-27

(2020-06-27, 12:25 PM)PaddyB Wrote: Install the @signalk/signalk-to-nmea0183 app, select XDR and activate >

[Image: hQ1Uj2S.png]
Ciao PaddyB and thank you, however, as you see, installed and selected. I'll try to reinstall SignalK Server to see if anything changes!

https://i.imgur.com/rjsX8WS.png

How to configure SignalK - tkurki - 2020-06-27

Why don’t you first make sure your system is receiving those inputs in Signal K.

I am not aware anything wrong systematically with the SK update process. If there is I’d oike to fix it.


Sent from my iPhone using Tapatalk

RE: How to configure SignalK - PaddyB - 2020-06-27

(2020-06-27, 01:49 PM)Max1947 Wrote: Ciao PaddyB and thank you, however, as you see, installed and selected. I'll try to reinstall SignalK Server to see if anything changes!

https://i.imgur.com/rjsX8WS.png

Signalk will be sending out XDR Nmea messages then, on port 10110. Your barometer doesn't seem to be getting any data either, is the nmea converter definitely enabled? Opencpn set to receive nmea on port 10110?

RE: How to configure SignalK - Max1947 - 2020-06-27

@PaddyB, You mean these: 

https://i.imgur.com/jfE4Lr9.png
https://i.imgur.com/1fdGo44.png
https://i.imgur.com/vMHpR0Q.png
(2020-06-27, 01:58 PM)tkurki Wrote: Why don’t you first make sure your system is receiving those inputs in Signal K.

I am not aware anything wrong systematically with the SK update process. If there is I’d oike to fix it.


Sent from my iPhone using Tapatalk

(2020-06-27, 02:01 PM)PaddyB Wrote:
(2020-06-27, 01:49 PM)Max1947 Wrote: Ciao PaddyB and thank you, however, as you see, installed and selected. I'll try to reinstall SignalK Server to see if anything changes!

https://i.imgur.com/rjsX8WS.png

Signalk will be sending out XDR Nmea messages then, on port 10110. Your barometer doesn't seem to be getting any data either, is the nmea converter definitely enabled? Opencpn set to receive nmea on port 10110?

@Tkurki, this is what I see in SK:
https://i.imgur.com/euZq7Ql.png

and this the OpenCPN:
https://i.imgur.com/74ldrqX.png

if I have to do anything else (copy / paste, I can only do) let me know and thanks anyway!

RE: How to configure SignalK - PaddyB - 2020-06-27

(2020-06-27, 02:08 PM)Max1947 Wrote: @PaddyB, You mean these: 

https://i.imgur.com/jfE4Lr9.png
https://i.imgur.com/1fdGo44.png
https://i.imgur.com/vMHpR0Q.png

Opencpn looks like it's connecting to the right place, is the plugin turned on and working? 
Should show up in the dashboard >
[Image: Ln3JxJp.png]

And you could try this command in a terminal to see if any XDR sentences are getting created >

Quote:cat </dev/tcp/10.10.10.1/10110|grep 'XDR'

[Image: ifCkMA7.png]

RE: How to configure SignalK - Max1947 - 2020-06-27

(2020-06-27, 02:25 PM)PaddyB Wrote:
(2020-06-27, 02:08 PM)Max1947 Wrote: @PaddyB, You mean these: 

https://i.imgur.com/jfE4Lr9.png
https://i.imgur.com/1fdGo44.png
https://i.imgur.com/vMHpR0Q.png

Opencpn looks like it's connecting to the right place, is the plugin turned on and working? 
Should show up in the dashboard >
[Image: Ln3JxJp.png]

And you could try this command in a terminal to see if any XDR sentences are getting created >

Quote:cat </dev/tcp/10.10.10.1/10110|grep 'XDR'

[Image: ifCkMA7.png]@
@PaddyB, vedi:
https://i.imgur.com/GS52fgE.png