Restart after power failure - Generic LXDE desktop - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Restart after power failure - Generic LXDE desktop (/showthread.php?tid=2731) |
Restart after power failure - Generic LXDE desktop - abarrow - 2020-07-09 Hi all, I'm burning in a new OP box at home. It was working great yesterday, including the new additions I put in for two-finger touch screen. I left it on overnight and we had a power failure. This morning, upon restart, I have a generic LXDE-pi screen (not Openplotter), and the commands I put in /etc/xde/lxsession/LXDE-pi/autostart don't seem to be starting anymore. I'm trying to understand where the panel and desktop for OpenPlotter are actually stored, and where the file is that autostarts everything. I did find ~/.config/autostart/openplotter-startup.desktop for starting OpenPlotter apps, but I can't find any of the desktop stuff. Anyone know where that stuff is? Andy RE: Restart after power failure - Generic LXDE desktop - Sailoog - 2020-07-15 check this script in openplotter-gen: https://github.com/openplotter/pi-gen/blob/openplotter/stage6/01-install-openplotter/01-run.sh used files are here: https://github.com/openplotter/pi-gen/tree/openplotter/stage6/01-install-openplotter/files |