ARGON40 Users - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: ARGON40 Users (/showthread.php?tid=2738) |
ARGON40 Users - Didier B - 2020-07-10 It seems there is a conflict between ARGON40 case ON / OFF button & Open plotter ... Did so had the same issue, what was(is) the solution ? RE: ARGON40 Users - abarrow - 2020-07-10 I just looked at their script. It appears they use GPIO4 for the switch pin. Perhaps that's a conflict with something in OP? RE: ARGON40 Users - Didier B - 2020-07-10 (2020-07-10, 02:12 PM)abarrow Wrote: I just looked at their script. It appears they use GPIO4 for the switch pin.yes, probably, I think it is used by 1-wire. I will re-test deactivating 1 wire (2020-07-10, 04:14 PM)Didier B Wrote:(2020-07-10, 02:12 PM)abarrow Wrote: I just looked at their script. It appears they use GPIO4 for the switch pin.yes, probably, I think it is used by 1-wire. I will re-test deactivating 1 wire Bingo, that is the good work around, no 1 Wire until I can modify the Argon script ! So far so good Thanks Abarrow ! RE: ARGON40 Users - abarrow - 2020-07-10 (2020-07-10, 04:14 PM)Didier B Wrote: Bingo, that is the good work around, no 1 Wire until I can modify the Argon script ! Glad it worked. Here is my latest case. A little more rustic! https://photos.app.goo.gl/E2XAozXoLGi4ffUa9 RE: ARGON40 Users - Didier B - 2020-07-10 (2020-07-10, 05:13 PM)abarrow Wrote:(2020-07-10, 04:14 PM)Didier B Wrote: Bingo, that is the good work around, no 1 Wire until I can modify the Argon script ! Waow, it's so chic Andy ! RE: ARGON40 Users - Sailoog - 2020-07-15 (2020-07-10, 05:13 PM)abarrow Wrote:(2020-07-10, 04:14 PM)Didier B Wrote: Bingo, that is the good work around, no 1 Wire until I can modify the Argon script ! Really???? update please RE: ARGON40 Users - abarrow - 2020-07-15 Are you talking about my rustic case or Didier's fix for his Argon case problem? ;-) RE: ARGON40 Users - Sailoog - 2020-07-15 Your rustic case of course RE: ARGON40 Users - abarrow - 2020-07-15 LOL. Relatively inexpensive decorative box from Banggood, an SSD adapter with a Suptronics X710 power / cooling module. There's also a board taken from the inside of a Plugable 7 port USB hub. That's about it. I 3D printed a nice panel for the back for HDMI and power connection, as well as openings for ventilation. I just finished rebuilding my switchpanel and nav station - I couldn't bring myself to put a plastic box there! RE: ARGON40 Users - Sailoog - 2020-07-16 publish some pictures when you are done and we could add a link here: https://openplotter.readthedocs.io/en/latest/description/examples.html |