OpenMarine
move from Pi3 to Pi4 - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: move from Pi3 to Pi4 (/showthread.php?tid=2775)

Pages: 1 2


move from Pi3 to Pi4 - Spidgrou - 2020-07-22

Hi Everyone,
I would like to know if anyone move the SD card from Pi3 to Pi4 without any new installation.
I'm wondering if it will work.
I have my Pi3 with OP2 that works well and I would like to improve the performarce with the Pi4.

What do you think?
Thanks
Max
s/y  Y2K


RE: move from Pi3 to Pi4 - nebosa - 2020-07-23

Hello
Simply changing the plug does NOT work defensively !!
I have tested it.



RE: move from Pi3 to Pi4 - SkipperEarly - 2020-07-23

(2020-07-22, 10:48 PM)Spidgrou Wrote: Hi Everyone,
I would like to know if anyone move the SD card from Pi3 to Pi4 without any new installation.
I'm wondering if it will work.
I have my Pi3 with OP2 that works well and I would like to improve the performarce with the Pi4.

What do you think?
Thanks
Max
s/y  Y2K

just copy the SDcard and plug it into the pi4 - easy to test, if it works flawlessly depends also from your OP configuration (Moitessier hat or not etc).


RE: move from Pi3 to Pi4 - nebosa - 2020-07-23

no, pi3 card does not boot in pi4


RE: move from Pi3 to Pi4 - Sailoog - 2020-07-23

You should have no problem. I do that continuously while developing.
If you have latest OP2 version it will boot on RPi3 and 4. Old OP and Raspbian versions will not boot on RPi4.
When you run OP in RPi4 openGL is enabled by default.


RE: move from Pi3 to Pi4 - Spidgrou - 2020-07-24

Thanks to everyone.
Now I'm make an image of my SD and I will try to put on a Pi4.

Max


RE: move from Pi3 to Pi4 - Tuomas_S - 2020-08-14

(2020-07-24, 01:35 AM)Spidgrou Wrote: Thanks to everyone.
Now I'm make an image of my SD and I will try to put on a Pi4.

Max

Did it work? I bricked my pi3 and was thinking about  upgrading.


RE: move from Pi3 to Pi4 - Spidgrou - 2020-08-15

(2020-08-14, 04:17 PM)Tuomas_S Wrote:
(2020-07-24, 01:35 AM)Spidgrou Wrote: Thanks to everyone.
Now I'm make an image of my SD and I will try to put on a Pi4.

Max

Did it work? I bricked my pi3 and was thinking about  upgrading.

HI Thomas 
I didn't try yet... 

Max


RE: move from Pi3 to Pi4 - Tuomas_S - 2020-08-16

so it does work, however c-charts sensed changed unit and apparently i need to repurchase my charts, which is a bummer.


RE: move from Pi3 to Pi4 - emilecantin - 2020-08-17

(2020-08-16, 07:58 PM)Tuomas_S Wrote: so it does work, however c-charts sensed changed unit and apparently i need to repurchase my charts, which is a bummer.

They make a USB dongle for exactly that reason; it works really well.