![]() |
Schematic or instructions to connect IMU to RPI pins - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: Schematic or instructions to connect IMU to RPI pins (/showthread.php?tid=2830) |
Schematic or instructions to connect IMU to RPI pins - rastam4n - 2020-08-09 I have spent about an hour searching around and I just cannot seem to find anything. I purchased this IMU breakout board https://www.digikey.ca/en/products/detail/sparkfun-electronics/SEN-13762/6166011 and I want to try and build my own IMU hat but I cannot seem to find any instructions/schematics on which pins go to which pins. I figure I am missing something glaringly obvious... RE: Schematic or instructions to connect IMU to RPI pins - Max1947 - 2020-08-09 (2020-08-09, 04:03 PM)rastam4n Wrote: I have spent about an hour searching around and I just cannot seem to find anything. Hi, maybe it can help you: https://maker.pro/raspberry-pi/tutorial/how-to-interface-an-imu-sensor-with-a-raspberry-pi ![]() RE: Schematic or instructions to connect IMU to RPI pins - rastam4n - 2020-08-09 (2020-08-09, 04:23 PM)Max1947 Wrote:(2020-08-09, 04:03 PM)rastam4n Wrote: I have spent about an hour searching around and I just cannot seem to find anything. Thank you! |