OpenCPN freezes after 20 seconds - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: OpenCPN freezes after 20 seconds (/showthread.php?tid=2866) |
OpenCPN freezes after 20 seconds - SaltyPaws - 2020-08-20 Noob setup: RPi4 Buster, headless, VNC. New download and install and upgrade. OCPN 5.2. Everything works fine until I add connections to O. If I add just NMEA 0183 (4800) from the nav instruments in O as a serial connection, it seems fine. If I add only NMEA 0183 (38400) from AIS then after about 20 seconds, the O interface slows to just above frozen (30 sec to respond to the setup cog wheel.) If I use SignalK, with the serial connections removed, and the network connection localhost:3000, the same thing occurs. I would prefer to use SignalK. I was just using serial connections for testing. I went through the Serial setup and assigned aliases, and then assigned those to SignalK. For the first 20 seconds, everything seems to work. What's going on? Thx! RE: OpenCPN freezes after 20 seconds - abarrow - 2020-08-21 I'm getting random freezes as well. I end up having to let the OS shut it down ("the process is not responding") and then start it twice afterwards because it asks me if I want to start in safe mode. Mine is with a screen, not VNC. RE: OpenCPN freezes after 20 seconds - SaltyPaws - 2020-08-21 Mine are not random. They are highly repeatable, at the 20 seconds mark... ☺ And yes, I get the safe mode query from OCPN too. RE: OpenCPN freezes after 20 seconds - Sailoog - 2020-09-14 Could you report this to opencpn developers please? |