[SOLVED] Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: [SOLVED] Raspberry 4 + moitessier hat / signalk -> opencpn: freeze (/showthread.php?tid=2871) |
[SOLVED] Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - luchin0 - 2020-08-22 After tryng to use signalk directly in opencpn the gps data seems to be unstable, with random data and freeze opencpn. Using signalk->nmea convertor and nmea as input in opencpn there wasn't any problem. Now because of the opencpn freeze i can't go back to the nmea input configuration. Any suggestions? RE: Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - Sailoog - 2020-09-14 is the signal k connection the only one? to start opencpn from scratch remove the folder /home/pi/.opencpn please if the issue persists please report to opencpn developers RE: Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - Didier B - 2020-09-22 (2020-09-14, 06:52 PM)Sailoog Wrote: is the signal k connection the only one?I got the same difficulties : gps unstability, and OpenCPN freezing (25% CPU occupancy, i.e. one core occupied 100% (= looping ?) and impossibility to close OpenCPN but using task manager to terminate it. I also had the idea to uninstall / re-install but with few success. I applied the Sailoog's advice to remove the directory .opencpn, we will see how it goes. More report later... RE: Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - Max1947 - 2020-09-22 (2020-09-22, 04:55 PM)Didier B Wrote:(2020-09-14, 06:52 PM)Sailoog Wrote: is the signal k connection the only one?I got the same difficulties : gps unstability, and OpenCPN freezing (25% CPU occupancy, i.e. one core occupied 100% (= looping ?) and impossibility to close OpenCPN but using task manager to terminate it. I also had the idea to uninstall / re-install but with few success. Hi, same configuration and same problems. OpenCPN freeze! RE: Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - Didier B - 2020-09-23 Hi all please see my post It seems Open CPN is confused about having a FIX when GPS is long to deliver reliable position information ... RE: Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - Sailoog - 2020-09-27 https://forum.openmarine.net/showthread.php?tid=2954 marking as solved, reopen if necessary Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - jamieFL - 2020-09-29 I updated Signal K Installer and Serial today. When I activate the signal K network connection, I lose GPS. When I put it back to the older way, GPS reconnects. I verified that signal k version is 1.34 and all other updates have been installed. I did not delete the .opencpn directory yet because I'm not sure if it is still needed and if so, how exactly so I need to do it so I don't lose all my opencpn configuration. RE: [SOLVED] Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - luchin0 - 2020-09-29 I updated signalk server and installer too, but I have the same issue with no fix on gps. The sistem is unusless still the first time the issue arrived (after updating rspi and moitessier drive) RE: [SOLVED] Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - Sailoog - 2020-09-29 OK, reopening the thread, do not panic. It did not seem to me a signal k problem, so let's reopen the issue in OpenCPN support: https://www.cruisersforum.com/forums/showthread.php?p=3239078#post3239078 I can not reproduce the issue, so please all of you suffering this try to share your scenario there. RE: Raspberry 4 + moitessier hat / signalk -> opencpn: freeze - luchin0 - 2020-09-29 (2020-09-29, 10:25 AM)Sailoog Wrote: OK, reopening the thread, do not panic. It did not seem to me a signal k problem, so let's reopen the issue in OpenCPN support: Hi Sailoog, i don't think it's a opencpn issue, yesterday semms everything works after sometimes that rspi was working. After closed and reopened opencpn the issue come again. My configuration is: Rspi 4 Moitessier hat 1 Everything updated Untill when i update rpi firmware and moitessier hat drive (changing to signalk configuration for opencpn) there wasn't any problem. Let me know how can i give you more information to reproduce the issue. |