OpenMarine
AIS Signals in chart - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: AIS Signals in chart (/showthread.php?tid=2939)



AIS Signals in chart - N2S3 - 2020-09-17

hello,

my set: openplotter running in a Raspberry Pi 4, all clean.

In the chart I see the gps Position of my own tug.


Had calibrated a nooelectric stick, using a vhf antenna for the ppm, channel etc.
But what I have to do, to send the signal to signal k and show any AIS-Signals in the chart?

Going to "connections", but what exact connections to create?
Input, output, Network, UDP, signal K. There are many options.
What is the right direction.
I assume, there is one conncetion needed to feed signal key and another one to feed cpn or the chart.

All trying resulting in warnings and no signals in my chart.

I'm living near the river Rhine in Cologne, there is much AIS use by cargo ships.
but no results...

Thx for any help
Gerhard


RE: AIS Signals in chart - Sailoog - 2020-09-24

manual updated with detailed instructions:
https://openplotter.readthedocs.io/en/latest/sdr-vhf/sdr-vhf_app.html