+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: Data display (/showthread.php?tid=2955)
Data display - Ratsea - 2020-09-23
I have a simple system with a rpi running OP and a pc running opencpn. For a while a struggled with setting to make the pc/opencpn talk to the autopilot.
I have pc linked to rpi via UDP to Signal K and a serial output to the Raymarine autopilot on NMEA0183.
On the dashboard I can see the incoming autopilot data input but there is no indication that data is outbound to the autopilot yet it's all working nicely.
Should I be able to check this output. It would be useful in case of a loop.