OpenMarine
Signal K Server 1.35 with Source Priorities - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Signal K Server 1.35 with Source Priorities (/showthread.php?tid=2999)

Pages: 1 2


Signal K Server 1.35 with Source Priorities - tkurki - 2020-10-10

SK server 1.35 (1.35.1 to be exact) is available with a new feature for managing multiple sources for the same data: source priorities.

https://github.com/SignalK/signalk-server/releases/tag/v1.35.0

Server / Connections page has an additional component where you can configure priorities and timeouts per source. See the embedded explanation there or server readme for a short explanation.

I'd be interested to hear from the people for whom this is relevant - how does it serve you? Room for improvement? Here or Slack, Slack is quicker.


RE: Signal K Server 1.35 with Source Priorities - monos1 - 2020-10-13

Well, I was having problems with magnetic heading data from two different sources. One from the Seatalk and Raymarine compass connection and the other from HAT Moitessier. Thanks to this new function I can easily choose which of the two magnetic heading sources has priority. For me this is a great advance.

Big thanks.


RE: Signal K Server 1.35 with Source Priorities - Lazzz - 2020-10-13

I haven't had a chance to try this yet but I'm pretty sure it will solve my problems as well - ie doubled up inputs from Raymarine etc

Thanks tkurki Smile


RE: Signal K Server 1.35 with Source Priorities - verkerkbr - 2020-10-14

Hello TKurki,

Interesting. But with a new install of the SignalK server. I see no longer an option for nmea183 input. Is this an error ?

Or do I need additional settings. It seems only for NMEA2K.

Bram


RE: Signal K Server 1.35 with Source Priorities - tkurki - 2020-10-14

(2020-10-14, 07:17 PM)verkerkbr Wrote: Hello TKurki,

Interesting. But with a new install of the SignalK server. I see no longer an option for nmea183 input. Is this an error ?

Or do I need additional settings. It seems only for NMEA2K.

Bram


I don't know what you are talking about - "no longer an option for nmea0183 input"?


Are you confusing Source Priorities (last item under Data Connections, scroll all the way down) with NMEA2000 filtering (under a specific NMEA 2000 connection)?


RE: Signal K Server 1.35 with Source Priorities - verkerkbr - 2020-10-14

(2020-10-14, 09:06 PM)tkurki Wrote:
(2020-10-14, 07:17 PM)verkerkbr Wrote: Hello TKurki,

Interesting. But with a new install of the SignalK server. I see no longer an option for nmea183 input. Is this an error ?

Or do I need additional settings. It seems only for NMEA2K.

Bram


I don't know what you are talking about - "no longer an option for nmea0183 input"?


Are you confusing Source Priorities (last item under Data Connections, scroll all the way down) with NMEA2000 filtering (under a specific NMEA 2000 connection)?

It is version 1.35,1. If I go to data connections and like to add my serial nmea183 gps. Then only NMEA2K is available. No way to install nmea183 items.

Reinstalled SignalK server several times, but no result. MXTommy/Kip was not installable. Changes in NPM ? Kernel version is 5.8.

Regards,

Bram


RE: Signal K Server 1.35 with Source Priorities - tkurki - 2020-10-15

(2020-10-14, 09:44 PM)verkerkbr Wrote: It is version 1.35,1. If I go to data connections and like to add my serial nmea183 gps. Then only NMEA2K is available. No way to install nmea183 items.

Works for me on 1.135.1.

[Image: 96087233-388fd680-0ecc-11eb-8da7-5b2b3a604e1c.png]


RE: Signal K Server 1.35 with Source Priorities - monos1 - 2020-10-15

For me is working OK too. No problem at all.


RE: Signal K Server 1.35 with Source Priorities - verkerkbr - 2020-10-15

Sorry for the onconvinience But the data type was always off the screen. So the only option I saw was NMEA2K. Tried it several times. But always the data format was not on the screen. And I always scroll to the bottom to fill in the missing parts. Never to the top of the screen.
Problem was too simple for me.

Bram


RE: Signal K Server 1.35 with Source Priorities - Lazzz - 2020-11-05

Just want to know if I've done this correctly please.

I only want input from gps - doubled/tripled up info from can (Chartplotter) is slowing down SK