+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Moitessier upgrade problem (/showthread.php?tid=3046)
Moitessier upgrade problem - SFH - 2020-10-31
Following the Raspberry 4 kernel upgrade and upgrade to latest Moitessier firmware version I get this problem>
******************************************************************************************
FIRMWARE UPDATE SUCCESSFULL!!!
******************************************************************************************
insmod: ERROR: could not insert module ./moitessier_5.4.72-v7l+.ko: Invalid module format
******************************************************************************************
ERROR occured!!
Could not load "./moitessier_5.4.72-v7l+.ko".
******************************************************************************************
******************************************************************************************
ERROR occured!!
You might try to install the package again.
******************************************************************************************
dpkg: error processing package moitessier (--configure):
installed moitessier package post-installation script subprocess returned error exit status 1
Setting up librhash0:armhf (1.3.8-1) ...
Setting up cmake-data (3.13.4-1) ...
Setting up libjsoncpp1:armhf (1.7.4-3) ...
Setting up cmake (3.13.4-1) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for libc-bin (2.28-10+rpi1) ...
Errors were encountered while processing:
moitessier
E: Sub-process /usr/bin/dpkg returned an error code (1)
pi@openplotter:~ $
Any good idea on how to fix this?
RE: Moitessier upgrade problem - Sailoog - 2020-10-31
It seems that the new kernel has broken the driver again. Rooco guys are working on it, I will notify here when solved.
RE: Moitessier upgrade problem - holgerw - 2020-10-31
Yes, it is broken again, even going back to the last stable version did not solve this. the driver installs but the module does not load, so no output.
I tried to activate the internal NMEA Outputs on the moi1-Board to 9600 pi-UART, but no success even here.
Hoping for rocco to fix it soon.
So, DO NOT update to new kernels !!!
RE: Moitessier upgrade problem - Rooco - 2020-11-01
The current issue with the package is caused due to a new toolchain used by Raspberry Pi to compile the latest kernel 5.4.72. Unfortunately the community was not noticed about the change. A new package is already in testing stage and will be released very soon.
RE: Moitessier upgrade problem - holgerw - 2020-11-01
Thanks for your Work, more that it is not your Fault here.
RE: Moitessier upgrade problem - holgerw - 2020-11-01
cool, version 7.5.2.2 works again on raspi 4 anf moitessier 1.