+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4)
+--- Thread: [CLOSED] Fail to Update OpenPlotter 1.0.0 alpha --> 1.2.0 alpha (/showthread.php?tid=3074)
[CLOSED] Fail to Update OpenPlotter 1.0.0 alpha --> 1.2.0 alpha - Arruba - 2020-11-08
I am trying to update my installation to the last version.
First I updated OpenCPN to 5.2.4, then I tried to update OpenPlotter, without success.
The problem is reported down the page. The problem seem to be related with hostapd.service
Can anyone can help me on fixing this?
Thanyou
Roberto
1.0.0 alpha --> 1.2.0 alpha
UPDATING PACKAGES...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up hostapd (2:2.6-21~bpo9~rpt1) ...
Job for hostapd.service failed because the control process exited with error code.
See "systemctl status hostapd.service" and "journalctl -xe" for details.
invoke-rc.d: initscript hostapd, action "restart" failed.
● hostapd.service - Advanced IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
Loaded: loaded (/lib/systemd/system/hostapd.service; disabled; vendor preset: enabled)
Active: activating (auto-restart) (Result: exit-code) since Sun 2020-11-08 00:19:56 CET; 73ms ago
Process: 5491 ExecStart=/usr/sbin/hostapd -P /run/hostapd.pid -B $DAEMON_OPTS ${DAEMON_CONF} (code=exited, status=1/FAILURE)
Nov 08 00:19:56 openplotter2 systemd[1]: hostapd.service: Unit entered failed…ate.
Nov 08 00:19:56 openplotter2 systemd[1]: hostapd.service: Failed with result …de'.
Hint: Some lines were ellipsized, use -l to show in full.
dpkg: error processing package hostapd (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
hostapd
E: Sub-process /usr/bin/dpkg returned an error code (1)
#### ERROR. ABORTING, PRESS ENTER TO EXIT ####
RE: Fail to Update OpenPlotter 1.0.0 alpha --> 1.2.0 alpha - Luckbert - 2020-11-08
Hello Roberto,
Does it have an important grind why you use version 1.0 or 1.2?
No work is being done on these versions.
The current version is 2.x
Download a new build and look forward to the new possibilities.
It is now completely rebuilt.
The documentation is much better.
Greetings Jürgen
RE: Fail to Update OpenPlotter 1.0.0 alpha --> 1.2.0 alpha - Sailoog - 2020-11-09
sorry, openplotter 1.x is no longer maintained