Signal K issue - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Signal K issue (/showthread.php?tid=3159) |
Signal K issue - topodom - 2020-12-27 Hi everyone, I just updated my OpenPlotter to version 2. First is there a documenation about the signal K serveur ? I found the API documentation here, but nothing about the serveur. So i have some questions. I struggle with the connections between OpenCPN and SignalK and i cannot make it work as described in the OpenPlotter documentation here https://openplotter.readthedocs.io/en/latest/serial/examples.html#input-output-data In the data connection section :
Of course signal K is sending, all his data to OpenCPN including RMB and APB if not filtered. Then OpenCPN is freezing, that happened to me many times. (I had to delete by hand the conection in the /home/pi/.opencpnopencpn.conf to laucnh it again. Is there a solution to filter signal K output data from the server ? I spent hours arround this topic, at this time Only the solution below is working. I have to set signal K input in OpenCPN to priority 2 to avoid confilcts or worse carsh.. RE: Signal K issue - tkurki - 2020-12-27 Outputting data seems to be real stumbling block. I tried to make things a little clearer: https://github.com/SignalK/signalk-server/wiki/Events-and-Outputting-Data. There's also https://github.com/SignalK/signalk-server/wiki/FAQ:-Frequently-Asked-Questions RE: Signal K issue - topodom - 2020-12-27 (2020-12-27, 08:17 PM)tkurki Wrote: Outputting data seems to be real stumbling block. I tried to make things a little clearer: https://github.com/SignalK/signalk-server/wiki/Events-and-Outputting-Data. Tks for the links it's useful and help a lot to understant. I have been able to plug my USB RS 422 device to feed the VHF radio first with OpenCPN and finlaly with Signal K also With Signal K i did :
|