OpenMarine
PyPilot PI and arduino nano communication - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18)
+--- Thread: PyPilot PI and arduino nano communication (/showthread.php?tid=3253)



PyPilot PI and arduino nano communication - Ssailor - 2021-02-03

Got everything wired up between the pi arduino and motor controller 

Pi still saying that there is no motor controller, any troubleshooting tips? Could not find other forums with this topic
Thank you in advance!


RE: PyPilot PI and arduino nano communication - rastam4n - 2021-02-03

(2021-02-03, 01:03 AM)JSsailor Wrote: Got everything wired up between the pi arduino and motor controller 

Pi still saying that there is no motor controller, any troubleshooting tips? Could not find other forums with this topic
Thank you in advance!

Have you activated the Uart in the serial app?


RE: PyPilot PI and arduino nano communication - Ssailor - 2021-02-04

I am sorry what? What is Uart and I have not seen anything on a serial app
Thanks


RE: PyPilot PI and arduino nano communication - seandepagnier - 2021-02-04

In openplotter you must enable the hardware serial port rather than using it for bluetooth.

Otherwise, the controller also must be powered.