+- OpenMarine (https://forum.openmarine.net)
+-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18)
+--- Thread: Webapp - No connection (newest op image) (/showthread.php?tid=3254)
RE: Webapp - No connection (newest op image) - esm - 2021-07-26
Hi Sean when I try git pull I am getting Fatal: Not a git repository (or any of the parent directories) .git . I went back in and cleaned out the old files and it is still not allowing the git pull sorry about this I am still a novice
RE: Webapp - No connection (newest op image) - seandepagnier - 2021-07-27
well it sounds corrupted try:
rm -rf pypilot
git clone http://github.com/pypilot/pypilot
RE: Webapp - No connection (newest op image) - esm - 2021-07-27
(2021-07-27, 01:52 AM)seandepagnier Wrote: well it sounds corrupted try:
rm -rf pypilot
git clone http://github.com/pypilot/pypilot
So this is interesting, I did that prior to your suggestion, but it gave me the same error, I tried a completely fresh install this morning and I am coming up with the same thing.
RE: Webapp - No connection (newest op image) - seandepagnier - 2021-07-27
please post the terminal output. Your error is technically impossible
RE: Webapp - No connection (newest op image) - esm - 2021-07-28
(2021-07-27, 08:07 PM)seandepagnier Wrote: please post the terminal output. Your error is technically impossible
You are correct!!! I made the mistake in my haste after a fresh install I put git pull instead of git clone. Got it all installed tonight and tested in the slip, everything is working well. Will take it out later this week for a test in the Bay. Thank you for your patience and all of your help.
RE: Webapp - No connection (newest op image) - esm - 2021-07-30
I wanted to provide a quick update on this. I initially installed a pican-m board, and set up the can bus first, and then tried to install pypilot. When I started from scratch without the pican-m and ran the setup there were no issues and pypilot works great. Last night I started fresh with another sd card and set up the pican-m and can bus, and the issue was created again. Ultimately I will run a two pi setup with a signalk server feeding data, I just wanted to see if there were any other related issues with this setup. The issue with doing this was two parts, the first is the IMU is not recognized in pypilot (probably due to the sharing of pins), and secondly, the pypilot server will not connect.
RE: Webapp - No connection (newest op image) - seandepagnier - 2021-07-31
You will have to consider the hardware differences as well as software of what you are running. I cannot debug every hardware configuration, but if as you say the pins are conflicting then this is an obvious issue. Of course using multiple pi is possible easy way to avoid these issues. The pi zero w with tinycore is very stable with tinypilot so maybe this is a good option.