Ready to be installed in Spring - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How I did it (https://forum.openmarine.net/forumdisplay.php?fid=6) +--- Thread: Ready to be installed in Spring (/showthread.php?tid=3276) |
Ready to be installed in Spring - Techstyle - 2021-02-13 Here is my setup, ready to be installed in spring: Raspberry Pi 4 4Gb 10.1" touch screen monitor - https://www.amazon.com/gp/product/B082HWF2HW power supply and auto shutdown system - see https://youtu.be/45IxpEa0ZcM 'case' or heatsink - https://www.amazon.com/gp/product/B085XPHY77 GPIO adapter - https://www.amazon.com/gp/product/B084C69VSQ Seatalk1 Optocoupler - https://www.amazon.com/gp/product/B01L1OI1HC the Screen will be mounted in the Nav station with the Pi and there will be an iPad at the Helm running VNC. the Pi will be connected to the stereo and running Pandora RE: Ready to be installed in Spring - Sailoog - 2021-02-16 looks cool, thanks for sharing, do not forget to share your final installation RE: Ready to be installed in Spring - Techstyle - 2021-03-29 (2021-02-16, 07:49 PM)Sailoog Wrote: looks cool, thanks for sharing, do not forget to share your final installation Installed in the Nav station - Splash screen WIth KIP and OpenCPN - not many boats around but 1 on AIS, Wind comes from ST1 using the Optocoupler |